* [DevTools] add simple events for internal logging
* fix lint
* fix lint
* better event name
* fix flow
* better way to fix flow
* combine 'select-element'
* use same event name for selecting element by inspecting
This PR:
* Simplifies the code in `SidebarEventInfo` by passing it the actual clicked event rather than an index.
* Lightly refactored the `SidebarEventInfo` code so that it can be used for more than just `schedulingEvents`
* Fixes bug. Previously, whenever a state update event was clicked, we updated the `selectedCommitIndex` in the `ProfilerContext`. However, this index is used for the selected commit in the Flamegraph profiler, which caused a bug where if you would change the contents of the event sidebar, the commit sidebar in the Flamegraph profiler would change too. This PR replaces this with the actual event info instead
Add column number for `viewSourceLineFunction` and renamed the function to `viewUrlSourceFunction` to match the other source function naming conventions
* [DevTools] front-end for profiling event stack
Adds a side-bar to the profiling tab. Users can now select an update event, and are
shown the callstack from the originating component. When a source path is available
there is now UI to jump to source.
Add FB enabled feature flag: enableProfilerComponentTree for the side-bar.
resolves#24170
This PR:
* Increases test retry count to 2 so that flaky tests have more of a chance to pass
* Ideally most e2e tests will run for all React versions (and ensure DevTools elegantly fails if React doesn't support its features). However, some features aren't supported in older React versions at all (ex. Profiling) Add runOnlyForReactRange function in these cases to skip tests that don't satisfy the correct React semver range
* Fix should allow searching for component by name test, which was flaky because sometimes the Searchbox would be unfocused the second time we try to type in it
* Edited test Should allow elements to be inspected to check that element inspect gracefully fails in older React versions
* Updated config to add a config.use.url field and a config.use.react_version field, which change depending on the React Version (and whether it's specified)
We used to listen to at the document level for this event. That allowed us to listen to up/down arrow key events while another section
of DevTools (like the search input) was focused. This was a minor UX positive.
(We had to use ownerDocument rather than document for this, because the DevTools extension renders the Components and Profiler tabs into portals.)
This approach caused a problem though: it meant that a react-devtools-inline instance could steal (and prevent/block) keyboard events from other JavaScript on the page– which could even include other react-devtools-inline instances. This is a potential major UX negative.
Given the above trade offs, we now listen on the root of the Tree itself.
Rationale: The only case where the unsupported dialog really matters is React Naive. That's the case where the frontend and backend versions are most likely to mismatch. In React Native, the backend is likely to send the bridge protocol version before sending operations– since the agent does this proactively during initialization.
I've tested the React Native starter app– after forcefully downgrading the backend version to 4.19.1 (see #23307 (comment)) and verified that this change "fixes" things. Not only does DevTools no longer throw an error that causes the UI to be hidden– it works (meaning that the Components tree can be inspected and interacted with).
This information can help with bug investigation for renderers (like React Native) that embed the DevTools backend into their source (separately from the DevTools frontend, which gets run by the user).
If the DevTools backend is too old to report a version, or if the version reported is the same as the frontend (as will be the case with the browser extension) then only a single version string will be shown, as before. If a different version is reported, then both will be shown separately.
Refactor DevTools to record Timeline data (in memory) while profiling. Updated the Profiler UI to import/export Timeline data along with legacy profiler data.
Relates to issue #22529
* DevTools: Only show StrictMode badge on root elements
Showing an inline non-compliance badge for every element in the tree is noisy. This commit changes it so that we only show inline icons for root elements (although we continue to show an icon for inspected elements regardless).
Builds on top of the existing Playwright tests to plug in the test selector API: https://gist.github.com/bvaughn/d3c8b8842faf2ac2439bb11773a19cec
My goals in doing this are to...
1. Experiment with the new API to see what works and what doesn't.
2. Add some test selector attributes (and remove DOM-structure based selectors).
3. Focus the tests on DevTools itself (rather than the test app).
I also took this opportunity to add a few new test cases– like named hooks, editable props, component search, and profiling- just to play around more with the Playwright API.
Relates to issue #22646
Adds the concept of subtree modes to DevTools to bridge protocol as follows:
1. Add-root messages get two new attributes: one specifying whether the root is running in strict mode and another specifying whether the root (really the root's renderer) supports the concept of strict mode.
2. A new backend message type (TREE_OPERATION_SET_SUBTREE_MODE). This type specifies a subtree root (id) and a mode (bitmask). For now, the only mode this message deals with is strict mode.
The DevTools frontend has been updated as well to highlight non-StrictMode compliant components.
The changes to the bridge protocol require incrementing the bridge protocol version number, which will also require updating the version of react-devtools-core backend that is shipped with React Native.
Adds the concept of "plugins" to the inspected element payload. Also adds the first plugin, one that resolves StyleX atomic style names to their values and displays them as a unified style object (rather than a nested array of objects and booleans).
Source file names are displayed first, in dim color, followed by an ordered set of resolved style values.
For builds with the new feature flag disabled, there is no observable change.
A next step to build on top of this could be to make the style values editable, but change the logic such that editing one directly added an inline style to the item (rather than modifying the stylex class– which may be shared between multiple other components).
Refactor SearchInput component (used in Components tree) to be generic DevTools component with two uses: ComponentSearchInput and TimelineSearchInput.
Refactored Timeline Suspense to more closely match other, newer Suspense patterns (e.g. inspect component, named hooks) and colocated Susepnse code in timelineCache file.
Add search by component name functionality to the Timeline. For now, searching zooms in to the component measure and you can step through each time it rendered using the next/previous arrows.
* Revert "Only show DevTools warning about unrecognized build in Chrome (#22571)"
This reverts commit b72dc8e930.
* Revert "Show warning in UI when duplicate installations of DevTools extension are detected (#22563)"
This reverts commit 930c9e7eeb.
* Revert "Prevent errors/crashing when multiple installs of DevTools are present (#22517)"
This reverts commit 545d4c2de7.
* Remove all references to passing extensionId in postMessage
* Keep build changes
* lint
* Revise ESLint rules for string coercion
Currently, react uses `'' + value` to coerce mixed values to strings.
This code will throw for Temporal objects or symbols.
To make string-coercion safer and to improve user-facing error messages,
This commit adds a new ESLint rule called `safe-string-coercion`.
This rule has two modes: a production mode and a non-production mode.
* If the `isProductionUserAppCode` option is true, then `'' + value`
coercions are allowed (because they're faster, although they may
throw) and `String(value)` coercions are disallowed. Exception:
when building error messages or running DEV-only code in prod
files, `String()` should be used because it won't throw.
* If the `isProductionUserAppCode` option is false, then `'' + value`
coercions are disallowed (because they may throw, and in non-prod
code it's not worth the risk) and `String(value)` are allowed.
Production mode is used for all files which will be bundled with
developers' userland apps. Non-prod mode is used for all other React
code: tests, DEV blocks, devtools extension, etc.
In production mode, in addiiton to flagging `String(value)` calls,
the rule will also flag `'' + value` or `value + ''` coercions that may
throw. The rule is smart enough to silence itself in the following
"will never throw" cases:
* When the coercion is wrapped in a `typeof` test that restricts to safe
(non-symbol, non-object) types. Example:
if (typeof value === 'string' || typeof value === 'number') {
thisWontReport('' + value);
}
* When what's being coerced is a unary function result, because unary
functions never return an object or a symbol.
* When the coerced value is a commonly-used numeric identifier:
`i`, `idx`, or `lineNumber`.
* When the statement immeidately before the coercion is a DEV-only
call to a function from shared/CheckStringCoercion.js. This call is a
no-op in production, but in DEV it will show a console error
explaining the problem, then will throw right after a long explanatory
code comment so that debugger users will have an idea what's going on.
The check function call must be in the following format:
if (__DEV__) {
checkXxxxxStringCoercion(value);
};
Manually disabling the rule is usually not necessary because almost all
prod use of the `'' + value` pattern falls into one of the categories
above. But in the rare cases where the rule isn't smart enough to detect
safe usage (e.g. when a coercion is inside a nested ternary operator),
manually disabling the rule will be needed.
The rule should also be manually disabled in prod error handling code
where `String(value)` should be used for coercions, because it'd be
bad to throw while building an error message or stack trace!
The prod and non-prod modes have differentiated error messages to
explain how to do a proper coercion in that mode.
If a production check call is needed but is missing or incorrect
(e.g. not in a DEV block or not immediately before the coercion), then
a context-sensitive error message will be reported so that developers
can figure out what's wrong and how to fix the problem.
Because string coercions are now handled by the `safe-string-coercion`
rule, the `no-primitive-constructor` rule no longer flags `String()`
usage. It still flags `new String(value)` because that usage is almost
always a bug.
* Add DEV-only string coercion check functions
This commit adds DEV-only functions to check whether coercing
values to strings using the `'' + value` pattern will throw. If it will
throw, these functions will:
1. Display a console error with a friendly error message describing
the problem and the developer can fix it.
2. Perform the coercion, which will throw. Right before the line where
the throwing happens, there's a long code comment that will help
debugger users (or others looking at the exception call stack) figure
out what happened and how to fix the problem.
One of these check functions should be called before all string coercion
of user-provided values, except when the the coercion is guaranteed not
to throw, e.g.
* if inside a typeof check like `if (typeof value === 'string')`
* if coercing the result of a unary function like `+value` or `value++`
* if coercing a variable named in a whitelist of numeric identifiers:
`i`, `idx`, or `lineNumber`.
The new `safe-string-coercion` internal ESLint rule enforces that
these check functions are called when they are required.
Only use these check functions in production code that will be bundled
with user apps. For non-prod code (and for production error-handling
code), use `String(value)` instead which may be a little slower but will
never throw.
* Add failing tests for string coercion
Added failing tests to verify:
* That input, select, and textarea elements with value and defaultValue
set to Temporal-like objects which will throw when coerced to string
using the `'' + value` pattern.
* That text elements will throw for Temporal-like objects
* That dangerouslySetInnerHTML will *not* throw for Temporal-like
objects because this value is not cast to a string before passing to
the DOM.
* That keys that are Temporal-like objects will throw
All tests above validate the friendly error messages thrown.
* Use `String(value)` for coercion in non-prod files
This commit switches non-production code from `'' + value` (which
throws for Temporal objects and symbols) to instead use `String(value)`
which won't throw for these or other future plus-phobic types.
"Non-produciton code" includes anything not bundled into user apps:
* Tests and test utilities. Note that I didn't change legacy React
test fixtures because I assumed it was good for those files to
act just like old React, including coercion behavior.
* Build scripts
* Dev tools package - In addition to switching to `String`, I also
removed special-case code for coercing symbols which is now
unnecessary.
* Add DEV-only string coercion checks to prod files
This commit adds DEV-only function calls to to check if string coercion
using `'' + value` will throw, which it will if the value is a Temporal
object or a symbol because those types can't be added with `+`.
If it will throw, then in DEV these checks will show a console error
to help the user undertsand what went wrong and how to fix the
problem. After emitting the console error, the check functions will
retry the coercion which will throw with a call stack that's easy (or
at least easier!) to troubleshoot because the exception happens right
after a long comment explaining the issue. So whether the user is in
a debugger, looking at the browser console, or viewing the in-browser
DEV call stack, it should be easy to understand and fix the problem.
In most cases, the safe-string-coercion ESLint rule is smart enough to
detect when a coercion is safe. But in rare cases (e.g. when a coercion
is inside a ternary) this rule will have to be manually disabled.
This commit also switches error-handling code to use `String(value)`
for coercion, because it's bad to crash when you're trying to build
an error message or a call stack! Because `String()` is usually
disallowed by the `safe-string-coercion` ESLint rule in production
code, the rule must be disabled when `String()` is used.
This commit builds on PR #22260 and makes the following changes:
* Adds a DevTools feature flag for named hooks support. (This allows us to disable it entirely for a build via feature flag.)
* Adds a new Suspense cache for dynamically imported modules. (This allows a component to suspend while importing an external code chunk– like the hook names parsing code).
* DevTools supports a hookNamesModuleLoaderFunction param to import the hook names module. I wish this could be handles as part of the react-devtools-shared package, but I'm not sure how to configure Webpack (4) to serve the chunk from react-devtools-inline. This seemed like a reasonable workaround.
The PR also contains an additional unrelated change:
* Removes pre-fetch optimization (added in DevTools: Improve named hooks network caching #22198). This optimization was mostly only important for cases where sources needed to be re-downloaded, something which we can now avoid in most cases¹ thanks to using cached responses already loaded by the page. (I tested this locally on Facebook and this change has no negative performance impact. There is still some overhead from serializing the JS through the Bridge but that's constant between the two approaches.)
¹ The case where we don't benefit from cached responses is when DevTools are opened after the page has already loaded certain scripts. This seems uncommon enough that I don't think it justified the added complexity of prefetching.
