In legacy roots, if an update originates outside of `batchedUpdates`,
check if it's inside an `act` scope; if so, treat it as if it were
batched. This is only necessary in legacy roots because in concurrent
roots, updates are batched by default.
With this change, the Test Utils and Test Renderer versions of `act` are
nothing more than aliases of the isomorphic API (still not exposed, but
will likely be the recommended API that replaces the others).
When migrating some internal tests I found it annoying that I couldn't
return anything from the `act` scope. You would have to declare the
variable on the outside then assign to it. But this doesn't play well
with type systems — when you use the variable, you have to check
the type.
Before:
```js
let renderer;
act(() => {
renderer = ReactTestRenderer.create(<App />);
})
// Type system can't tell that renderer is never undefined
renderer?.root.findByType(Component);
```
After:
```js
const renderer = await act(() => {
return ReactTestRenderer.create(<App />);
})
renderer.root.findByType(Component);
```
* Move internal version of act to shared module
No reason to have three different copies of this anymore.
I've left the the renderer-specific `act` entry points because legacy
mode tests need to also be wrapped in `batchedUpdates`. Next, I'll update
the tests to use `batchedUpdates` manually when needed.
* Migrates tests to use internal module directly
Instead of the `unstable_concurrentAct` exports. Now we can drop those
from the public builds.
I put it in the jest-react package since that's where we put our other
testing utilities (like `toFlushAndYield`). Not so much so it can be
consumed publicly (nobody uses that package except us), but so it works
with our build tests.
* Remove unused internal fields
These were used by the old act implementation. No longer needed.
Currently, in a React 18 root, `act` only works if you mock the
Scheduler package. This was because we didn't want to add additional
checks at runtime.
But now that the `act` testing API is dev-only, we can simplify its
implementation.
Now when an update is wrapped with `act`, React will bypass Scheduler
entirely and push its tasks onto a special internal queue. Then, when
the outermost `act` scope exists, we'll flush that queue.
I also removed the "wrong act" warning, because the plan is to move
`act` to an isomorphic entry point, simlar to `startTransition`. That's
not directly related to this PR, but I didn't want to bother
re-implementing that warning only to immediately remove it.
I'll add the isomorphic API in a follow up.
Note that the internal version of `act` that we use in our own tests
still depends on mocking the Scheduler package, because it needs to work
in production. I'm planning to move that implementation to a shared
(internal) module, too.
Upgrades the deprecation warning to a runtime error.
I did it this way instead of removing the export so the type is the same
in both builds. It will get dead code eliminated regardless.
The following APIs have been added to the `react` stable entry point:
* `SuspenseList`
* `startTransition`
* `unstable_createMutableSource`
* `unstable_useMutableSource`
* `useDeferredValue`
* `useTransition`
The following APIs have been added or removed from the `react-dom` stable entry point:
* `createRoot`
* `unstable_createPortal` (removed)
The following APIs have been added to the `react-is` stable entry point:
* `SuspenseList`
* `isSuspenseList`
The following feature flags have been changed from experimental to true:
* `enableLazyElements`
* `enableSelectiveHydration`
* `enableSuspenseServerRenderer`
* Remove redundant initial of isArray (#21163)
* Reapply prettier
* Type the isArray function with refinement support
This ensures that an argument gets refined just like it does if isArray is
used directly.
I'm not sure how to express with just a direct reference so I added a
function wrapper and confirmed that this does get inlined properly by
closure compiler.
* A few more
* Rename unit test to internal
This is not testing a bundle.
Co-authored-by: Behnam Mohammadi <itten@live.com>
* Bump version number
* Remove Scheduler indirection
I originally kept the React PriorityLevel and Scheduler PriorityLevel
types separate in case there was a versioning mismatch between the two
modules. However, it looks like we're going to keep the Scheduler module
private in the short to medium term, and longer term the public
interface will match postTask. So, I've removed the extra indirection
(the switch statements that convert between the two types).
The event priority constants exports by the reconciler package are
meant to be used by the reconciler (host config) itself. So it doesn't
make sense to export them from a module that requires them.
To break the cycle, we can move them to a separate module and import
that. This looks like a "deep import" of an internal module, which we
try to avoid, but conceptually these are part of the public interface
of the reconciler module. So, no different than importing from the main
`react-reconciler`.
We do need to be careful about not mixing these types of imports with
implementation details. Those are the ones to really avoid.
An unintended benefit of the reconciler fork infra is that it makes
deep imports harder. Any module that we treat as "public", like this
one, needs to account for the `enableNewReconciler` flag and forward
to the correct implementation.
* Add feature flag: enableStrongMemoryCleanup
Add a feature flag that will test doing a recursive clean of an unmount
node. This will disconnect the fiber graph making leaks less severe.
* Detach sibling pointers in old child list
When a fiber is deleted, it's still part of the previous (alternate)
parent fiber's list of children. Because children are a linked list, an
earlier sibling that's still alive will be connected to the deleted
fiber via its alternate:
live fiber
--alternate--> previous live fiber
--sibling--> deleted fiber
We can't disconnect `alternate` on nodes that haven't been deleted
yet, but we can disconnect the `sibling` and `child` pointers.
Will use this feature flag to test the memory impact.
* Combine into single enum flag
I combined `enableStrongMemoryCleanup` and `enableDetachOldChildList`
into a single enum flag. The flag has three possible values. Each level
is a superset of the previous one and performs more aggressive clean up.
We will use this to compare the memory impact of each level.
* Add Flow type to new host config method
* Re-use existing recursive clean up path
We already have a recursive loop that visits every deleted fiber. We
can re-use that one for clean up instead of adding another one.
Co-authored-by: Andrew Clark <git@andrewclark.io>
* The exported '<React.StrictMode>' tag remains the same and opts legacy subtrees into strict mode level one ('mode == StrictModeL1'). This mode enables DEV-only double rendering, double component lifecycles, string ref warnings, legacy context warnings, etc. The primary purpose of this mode is to help detected render phase side effects. No new behavior. Roots created with experimental 'createRoot' and 'createBlockingRoot' APIs will also (for now) continue to default to strict mode level 1.
In a subsequent commit I will add support for a 'level' attribute on the '<React.StrictMode>' tag (as well as a new option supported by ). This will be the way to opt into strict mode level 2 ('mode == StrictModeL2'). This mode will enable DEV-only double invoking of effects on initial mount. This will simulate future Offscreen API semantics for trees being mounted, then hidden, and then shown again. The primary purpose of this mode is to enable applications to prepare for compatibility with the new Offscreen API (more information to follow shortly).
For now, this commit changes no public facing behavior. The only mechanism for opting into strict mode level 2 is the pre-existing 'enableDoubleInvokingEffects' feature flag (only enabled within Facebook for now).
* Renamed strict mode constants
StrictModeL1 -> StrictLegacyMode and StrictModeL2 -> StrictEffectsMode
* Renamed tests
* Split strict effects mode into two flags
One flag ('enableStrictEffects') enables strict mode level 2. It is similar to 'debugRenderPhaseSideEffectsForStrictMode' which enables srtict mode level 1.
The second flag ('createRootStrictEffectsByDefault') controls the default strict mode level for 'createRoot' trees. For now, all 'createRoot' trees remain level 1 by default. We will experiment with level 2 within Facebook.
This is a prerequisite for adding a configurable option to 'createRoot' that enables choosing a different StrictMode level than the default.
* Add StrictMode 'unstable_level' prop and createRoot 'unstable_strictModeLevel' option
New StrictMode 'unstable_level' prop allows specifying which level of strict mode to use. If no level attribute is specified, StrictLegacyMode will be used to maintain backwards compatibility. Otherwise the following is true:
* Level 0 does nothing
* Level 1 selects StrictLegacyMode
* Level 2 selects StrictEffectsMode (which includes StrictLegacyMode)
Levels can be increased with nesting (0 -> 1 -> 2) but not decreased.
This commit also adds a new 'unstable_strictModeLevel' option to the createRoot and createBatchedRoot APIs. This option can be used to override default behavior to increase or decrease the StrictMode level of the root.
A subsequent commit will add additional DEV warnings:
* If a nested StrictMode tag attempts to explicitly decrease the level
* If a level attribute changes in an update
* Add `supportsMicrotasks` to the host config
Only certain renderers support scheduling a microtask, so we need a
renderer specific flag that we can toggle. That way it's off for some
renderers and on for others.
I copied the approach we use for the other optional parts of the host
config, like persistent mode and test selectors.
Why isn't the feature flag sufficient?
The feature flag modules, confusingly, are not renderer-specific, at
least when running the our tests against the source files. They are
meant to correspond to a release channel, not a renderer, but we got
confused at some point and haven't cleaned it up.
For example, when we run `yarn test`, Jest loads the flags from the
default `ReactFeatureFlags.js` module, even when we import the React
Native renderer — but in the actual builds, we load a different feature
flag module, `ReactFeatureFlags.native-oss.js.` There's no way in our
current Jest load a different host config for each renderer, because
they all just import the same module. We should solve this by creating
separate Jest project for each renderer, so that the flags loaded when
running against source are the same ones that we use in the
compiled bundles.
The feature flag (`enableDiscreteMicrotasks`) still exists — it's used
to set the React DOM host config's `supportsMicrotasks` flag to `true`.
(Same for React Noop) The important part is that turning on the feature
flag does *not* affect the other renderers, like React Native.
The host config will likely outlive the feature flag, too, since the
feature flag only exists so we can gradually roll it out and measure the
impact in production; once we do, we'll remove it. Whereas the host
config flag may continue to be used to disable the discrete microtask
behavior for RN, because RN will likely use a native (non-JavaScript)
API to schedule its tasks.
* Add `supportsMicrotask` to react-reconciler README
* Add the feature flag
* Add a host config method
* Wire it up to the work loop
* Export constants for third-party renderers
* Document for third-party renderers
* Fixed invalid DevTools work tags
Work tags changed recently (PR #13902) but we didn't bump React versions. This meant that DevTools has valid work tags only for master (and FB www sync) but invalid work tags for the latest open source releases. To fix this, I incremneted React's version in Git (without an actual release) and added a new fork to the work tags detection branch.
This commit also adds tags for the experimental Scope and Fundamental APIs to DevTools so component names will at least display correctly. Technically these new APIs were first introduced to experimental builds ~16.9 but I didn't add a new branch to the work tags fork because I don't they're used commonly. I've just added them to the 17+ branches.
* Removed FundamentalComponent from DevTools tag defs
* Remove Blocks
* Remove Flight Server Runtime
There's no need for this now that the JSResource is part of the bundler
protocol. Might need something for Webpack plugin specifically later.
* Devtools
* update all facebook.github.io links
* facebookincubator links : update some outdated links and fix two other broken links where they are actually the latest updated ones
If there are any suspended fallbacks at the end of the `act` scope,
force them to display by running the pending timers (i.e. `setTimeout`).
The public implementation of `act` achieves the same behavior with an
extra check in the work loop (`shouldForceFlushFallbacks`). Since our
internal `act` needs to work in both development and production, without
additional runtime checks, we instead rely on Jest's mock timers.
This doesn't not affect refresh transitions, which are meant to delay
indefinitely, because in that case we exit the work loop without
posting a timer.
In the next major release, we intend to drop support for using the `act`
testing helper in production. (It already fires a warning.) The
rationale is that, in order for `act` to work, you must either mock the
testing environment or add extra logic at runtime. Mocking the testing
environment isn't ideal because it requires extra set up for the user.
Extra logic at runtime is fine only in development mode — we don't want
to slow down the production builds.
Since most people only run their tests in development mode, dropping
support for production should be fine; if there's demand, we can add it
back later using a special testing build that is identical to the
production build except for the additional testing logic.
One blocker for removing production support is that we currently use
`act` to test React itself. We must test React in both development and
production modes.
So, the solution is to fork `act` into separate public and
internal implementations:
- *public implementation of `act`* – exposed to users, only works in
development mode, uses special runtime logic, does not support partial
rendering
- *internal implementation of `act`* – private, works in both
development and productionm modes, only used by the React Core test
suite, uses no special runtime logic, supports partial rendering (i.e.
`toFlushAndYieldThrough`)
The internal implementation should mostly match the public
implementation's behavior, but since it's a private API, it doesn't have
to match exactly. It works by mocking the test environment: it uses a
mock build of Scheduler to flush rendering tasks, and Jest's mock timers
to flush Suspense placeholders.
---
In this first commit, I've added the internal forks of `act` and
migrated our tests to use them. The public `act` implementation is
unaffected for now; I will leave refactoring/clean-up for a later step.
There is a worry that `useOpaqueIdentifier` might run out of unique IDs if running for long enough. This PR moves the unique ID counter so it's generated per server renderer object instead. For people who render different subtrees, this PR adds a prefix option to `renderToString`, `renderToStaticMarkup`, `renderToNodeStream`, and `renderToStaticNodeStream` so identifiers can be differentiated for each individual subtree.
Adds several new experimental APIs to aid with automated testing.
Each of the methods below accepts an array of "selectors" that identifies a path (or paths) through a React tree. There are four basic selector types:
* Component: Matches Fibers with the specified React component type
* Role: Matches Host Instances matching the (explicit or implicit) accessibility role.
* Test name: Matches Host Instances with a data-testname attribute.
* Text: Matches Host Instances that directly contain the specified text.
* There is also a special lookahead selector type that enables further matching within a path (without actually including the path in the result). This selector type was inspired by the :has() CSS pseudo-class. It enables e.g. matching a <section> that contained a specific header text, then finding a like button within that <section>.
API
* findAllNodes(): Finds all Host Instances (e.g. HTMLElement) within a host subtree that match the specified selector criteria.
* getFindAllNodesFailureDescription(): Returns an error string describing the matched and unmatched portions of the selector query.
* findBoundingRects(): For all React components within a host subtree that match the specified selector criteria, return a set of bounding boxes that covers the bounds of the nearest (shallowed) Host Instances within those trees.
* observeVisibleRects(): For all React components within a host subtree that match the specified selector criteria, observe if it’s bounding rect is visible in the viewport and is not occluded.
* focusWithin(): For all React components within a host subtree that match the specified selector criteria, set focus within the first focusable Host Instance (as if you started before this component in the tree and moved focus forwards one step).
* Root API should clear non-empty roots before mounting
Legacy render-into-subtree API removes children from a container before rendering into it. The root API did not do this previously, but just left the children around in the document.
This commit adds a new FiberRoot flag to clear a container's contents before mounting. This is done during the commit phase, to avoid multiple, observable mutations.
Some of our internal reconciler types have leaked into other packages.
Usually, these types are treated as opaque; we don't read and write
to its fields. This is good.
However, the type is often passed back to a reconciler method. For
example, React DOM creates a FiberRoot with `createContainer`, then
passes that root to `updateContainer`. It doesn't do anything with the
root except pass it through, but because `updateContainer` expects a
full FiberRoot, React DOM is still coupled to all its fields.
I don't know if there's an idiomatic way to handle this in Flow. Opaque
types are simlar, but those only work within a single file. AFAIK,
there's no way to use a package as the boundary for opaqueness.
The immediate problem this presents is that the reconciler refactor will
involve changes to our internal data structures. I don't want to have to
fork every single package that happens to pass through a Fiber or
FiberRoot, or access any one of its fields. So my current plan is to
share the same Flow type across both forks. The shared type will be a
superset of each implementation's type, e.g. Fiber will have both an
`expirationTime` field and a `lanes` field. The implementations will
diverge, but not the types.
To do this, I lifted the type definitions into a separate module.
