Add concise fault tolerance documentation to CLAUDE.md and the passes
README covering error accumulation, tryRecord wrapping, and the
distinction between validation vs infrastructure passes. Remove the
detailed planning document now that the work is complete.
Fix the transformFire early-exit in Pipeline.ts to only trigger on new
errors from transformFire itself, not pre-existing errors from earlier
passes. The previous `env.hasErrors()` check was too broad — it would
early-exit on validation errors that existed before transformFire ran.
Also add missing blank line in CodegenReactiveFunction.ts Context class,
and fix formatting in ValidateMemoizedEffectDependencies.ts.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35884).
* #35888
* __->__ #35884
Rename `state: Environment` to `env: Environment` in
ValidateMemoizedEffectDependencies visitor methods, and
`errorState: Environment` to `env: Environment` in
ValidatePreservedManualMemoization's validateInferredDep.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35883).
* #35888
* #35884
* __->__ #35883
Removes unnecessary indirection in 17 compiler passes that previously
accumulated errors in a local `CompilerError` instance before flushing
them to `env.recordErrors()` at the end of each pass. Errors are now
emitted directly via `env.recordError()` as they're discovered.
For passes with recursive error-detection patterns
(ValidateNoRefAccessInRender,
ValidateNoSetStateInRender), the internal accumulator is kept but
flushed
via individual `recordError()` calls. For InferMutationAliasingRanges,
a `shouldRecordErrors` flag preserves the conditional suppression logic.
For TransformFire, the throw-based error propagation is replaced with
direct recording plus an early-exit check in Pipeline.ts.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35882).
* #35888
* #35884
* #35883
* __->__ #35882
Remove `tryRecord()` from the compilation pipeline now that all passes
record
errors directly via `env.recordError()` / `env.recordErrors()`. A single
catch-all try/catch in Program.ts provides the safety net for any pass
that
incorrectly throws instead of recording.
Key changes:
- Remove all ~64 `env.tryRecord()` wrappers in Pipeline.ts
- Delete `tryRecord()` method from Environment.ts
- Add `CompileUnexpectedThrow` logger event so thrown errors are
detectable
- Log `CompileUnexpectedThrow` in Program.ts catch-all for non-invariant
throws
- Fail snap tests on `CompileUnexpectedThrow` to surface pass bugs in
dev
- Convert throwTodo/throwDiagnostic calls in HIRBuilder (fbt, this),
CodegenReactiveFunction (for-in/for-of), and BuildReactiveFunction to
record errors or use invariants as appropriate
- Remove try/catch from BuildHIR's lower() since inner throws are now
recorded
- CollectOptionalChainDependencies: return null instead of throwing on
unsupported optional chain patterns (graceful optimization skip)
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35881).
* #35888
* #35884
* #35883
* #35882
* __->__ #35881
Add test fixture demonstrating fault tolerance: the compiler now reports
both a mutation error and a ref access error in the same function, where
previously only one would be reported before bailing out.
Update plan doc to mark all phases as complete.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35877).
* #35888
* #35884
* #35883
* #35882
* #35881
* #35880
* #35879
* #35878
* __->__ #35877
- Change runWithEnvironment/run/compileFn to return
Result<CodegenFunction, CompilerError>
- Wrap all pipeline passes in env.tryRecord() to catch and record
CompilerErrors
- Record inference pass errors via env.recordErrors() instead of
throwing
- Handle codegen Result explicitly, returning Err on failure
- Add final error check: return Err(env.aggregateErrors()) if any errors
accumulated
- Update tryCompileFunction and retryCompileFunction in Program.ts to
handle Result
- Keep lint-only passes using env.logErrors() (non-blocking)
- Update 52 test fixture expectations that now report additional errors
This is the core integration that enables fault tolerance: errors are
caught,
recorded, and the pipeline continues to discover more errors.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35874).
* #35888
* #35884
* #35883
* #35882
* #35881
* #35880
* #35879
* #35878
* #35877
* #35876
* #35875
* __->__ #35874
Add error accumulation methods to the Environment class:
- #errors field to accumulate CompilerErrors across passes
- recordError() to record a single diagnostic (throws if Invariant)
- recordErrors() to record all diagnostics from a CompilerError
- hasErrors() to check if any errors have been recorded
- aggregateErrors() to retrieve the accumulated CompilerError
- tryRecord() to wrap callbacks and catch CompilerErrors
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35873).
* #35888
* #35884
* #35883
* #35882
* #35881
* #35880
* #35879
* #35878
* #35877
* #35876
* #35875
* #35874
* __->__ #35873
Remove dead code left behind after the removal of retryCompileFunction,
enableFire, and inferEffectDependencies:
- Delete ValidateNoUntransformedReferences.ts (always a no-op)
- Remove CompileProgramMetadata type and retryErrors from ProgramContext
- Remove 'client-no-memo' output mode
- Change compileProgram return type from CompileProgramMetadata | null
to void
Cleans up feature flags that do not have an active experiment and which
we don't currently plan to ship, one commit per flag. Notable removals:
* Automatic (inferred) effect dependencies / Fire: abandoned due to
early feedback. Shipped useEffectEvent which addresses some of the
use-cases.
* Inline JSX transform (experimented, not a consistent win)
* Context selectors (experimented, not a sufficient/consistent win given
the benefit the compiler already provides)
* Instruction Reordering (will try a different approach)
To decide which features to remove, I looked at Meta's internal repos as
well as eslint-pugin-react-hooks to see which flags were never
overridden anywhere. That gave a longer list of flags, from which I then
removed some features that I know are used in OSS.
Tracks locations for reactive scope dependencies, both on the deps and
portions of the path. The immediate need for this is a non-public
experiment where we're exploring type-directed compilation, and
sometimes look up the types of expressions by location. We need to
preserve locations accurately for that to work, including the locations
of the deps.
## Test Plan
Locations for dependencies are not easy to test: i manually spot-checked
the new fixture to ensure that the deps look right. This is fine as
best-effort since it doesn't impact any of our core compilation logic, i
may fix forward if there are issues and will think about how to test.
## Summary
Fix react-hooks/set-state-in-effect false negatives when Hooks are
called via a namespace import (e.g. `import * as React from 'react'` and
`React.useEffect(...))`. The validation now checks the MethodCall
property (the actual hook function) instead of the receiver object.
Issue: Bug: #35377
## How did you test this change?
Added a regression fixture;
Ran tests and verified it reports `EffectSetState` and matches the
expected output.
<img width="461" height="116" alt="Screenshot 2025-12-27 at 14 13 38"
src="https://github.com/user-attachments/assets/fff5aab9-0f2c-40e9-a6a5-b864c3fa6fbd"
/>
More snap improvements for use with agents:
* `yarn snap compile [--debug] <path>` for compiling any file,
optionally with debug logs
* `yarn snap minimize <path>` now accepts path as a positional param for
consistency w 'compile' command
* Both compile/minimize commands properly handle paths relative to the
compiler/ directory. When using `yarn snap` the current working
directory is compiler/packages/snap, but you're generally running it
from the compiler directory so this matches expectations of callers
better.
This is a combination of a) a subagent for investigating compiler errors
and b) testing that agent by fixing bugs with for loops within
try/catch. My recent diffs to support maybe-throw within value blocks
was incomplete and handled many cases, like optionals/logicals/etc
within try/catch. However, the handling for for loops was making more
assumptions and needed additional fixes.
Key changes:
* `maybe-throw` terminal `handler` is now nullable. PruneMaybeThrows
nulls the handler for blocks that cannot throw, rather than changing to
a `goto`. This preserves more information, and makes it easier for
BuildReactiveFunction's visitValueBlock() to reconstruct the value
blocks
* Updates BuildReactiveFunction's handling of `for` init/test/update
(and similar for `for..of` and `for..in`) to correctly extract value
blocks. The previous logic made assumptions about the shape of the
SequenceExpression which were incorrect in some cases within try/catch.
The new helper extracts a flattened SequenceExpression.
Supporting changes:
* The agent itself (tested via this diff)
* Updated the script for invoking snap to keep `compiler/` as the
working directory, allowing relative paths to work more easily
* Add an `--update` (`-u`) flag to `yarn snap minimize`, which updates
the fixture in place w the minimized version
Adds support for value terminals (optional/logical/ternary/sequence)
within try/catch clauses.
Try/catch expressions insert maybe-throw terminals after each
instruction, but BuildReactiveFunction's value block extraction was not
expecting these terminals. The fix is to roughly treat maybe-throw
similarly to goto, falling through to the continuation block, but there
are a few edge cases to handle.
I've also added extensive tests, including testing that errors correctly
flow to the catch handler.
Fixes missing source locations for ReturnStatement nodes in generated
ast. Simple change using existing pattern, only required changes to the
codegen step, no other pipeline changes.
**Most file changes are new lines in generated code.** [First
commit](d15e90ebe0)
has the relevant changes, second commit has the noisy snap updates.
I added an exception to the validator to not report an error when a
return statement will be optimized to an implicit return by codegen, as
there's no separate return statement to instrument anyways in the final
ast. An edge case when it comes to preserving source locations for
instrumentation that is likely not as common for most babel transforms
since they are not doing optimizations.
Autogenerated summaries of each of the compiler passes which allow
agents to get the key ideas of a compiler pass, including key
input/output invariants, without having to reprocess the file each time.
In the subsequent diff this seemed to help.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35595).
* #35607
* #35298
* #35596
* #35573
* __->__ #35595
* #35539
`invariant()` was a pain to use - we always record a single location,
but the API required passing a compiler detail. This PR replaces
`invariant()` (keeping the name) with `simpleInvariant()`s signature,
and updates call sites accordingly. I've noticed that agents
consistently get invariant() wrong, which aligns with it being tedious
to call when you're writing code by hand. The simplified API should help
a bit.
A few times an agent has constructed fixtures that are silently skipped
because the component has no jsx or hook calls. This PR updates snap to
ensure that for each fixture either:
1) There are at least one compile success/failure *and* the
`@expectNothingCompiled` pragma is missing
2) OR there are zero success/failures *and* the `@expectNothingCompiled`
pragma is present
This ensures we are intentional about fixtures that are expected not to
have compilation, and know if that expectation breaks.
`react-hooks/exhaustive-effect-dependencies` from
`ValidateExhaustiveDeps` reports errors for both missing and extra
effect deps. We already have `react-hooks/exhaustive-deps` that errors
on missing dependencies. In the future we'd like to consolidate this all
to the compiler based error, but for now there's a lot of overlap. Let's
enable testing the extra dep warning by splitting out reporting modes.
This PR
- Creates `on`, `off`, `missing-only`, and `extra-only` reporting modes
for the effect dep validation flag
- Temporarily enables the new rule with `extra-only` in
`eslint-plugin-react-hooks`
- Adds additional null checking to `manualMemoLoc` to fix a bug found
when running against the fixture
Summary:
These validations are not essential for compilation, with this we only
run that logic when outputMode is 'lint'
Test Plan:
Update fixtures and run tests
Putting up https://github.com/facebook/react/pull/35129 again
Reverted in https://github.com/facebook/react/pull/35346 after breaking
main before security patch
This change impacts output formatting in a lot of snaps, so is very
sensitive to additions in main to the fixtures resulting in broken tests
after merging, so we should try merge quickly after rebasing or do a
fast follow to the merge with a snap update.
### What
Fixes source locations for VariableDeclarator in the generated AST.
Fixes a number of the errors in the snapshot I added yesterday in the
source loc validator PR https://github.com/facebook/react/pull/35109
I'm not entirely sure why, but a side effect of the fix has resulted in
a ton of snaps needing updating, with some empty lines no longer present
in the generated output. I broke the change up into 2 separate commits.
The [first
commit](f4e4dc0f44)
has the core change and the update to the missing source locations test
expectation, and the [second
commit](cd4d9e944c)
has the rest of the snapshot updates.
### How
- Add location for variable declarators in ast codegen.
- We don't actually have the location preserved in HIR, since when we
lower the declarations we pass through the location for the
VariableDeclaration. Since VariableDeclarator is just a container for
each of the assignments, the start of the `id` and end of the `init` can
be used to accurately reconstruct it when generating the AST.
- Add source locations for object/array patterns for destructuring
assignment source location support
The current `validateNoSetStateInEffects` error has potential false
positives because
we cannot fully statically detect patterns where calling setState in an
effect is
actually valid. This flag `enableVerboseNoSetStateInEffect` adds a
verbose error mode that presents multiple possible
use-cases, allowing an agent to reason about which fix is appropriate
before acting:
1. Non-local derived data - suggests restructuring state ownership
2. Derived event pattern - suggests requesting an event callback from
parent
3. Force update / external sync - suggests using `useSyncExternalStore`
This gives agents the context needed to make informed decisions rather
than
blindly applying a fix that may not be correct for the specific
situation.
Alternative approach to #35282 for validating effect deps in the
compiler that builds on the machinery in ValidateExhaustiveDependencies.
Key changes to that pass:
* Refactor to track the dependencies of array expressions as temporaries
so we can look them up later if they appear as effect deps.
* Instead of not storing temporaries for LoadLocals of locally created
variables, we store the temporary but also propagate the local-ness
through. This allows us to record deps at the top level, necessary for
effect deps. Previously the pass was only ever concerned with tracking
deps within function expressions.
* Refactor the bulk of the dependency-checking logic from
`onFinishMemoize()` into a standalone helper to use it for the new
`onEffect()` helper as well.
* Add a new ErrorCategory for effect deps, use it for errors on
effects
* Put the effect dep validation behind a feature flag
* Adjust the error reason for effect errors
---------
Co-authored-by: Jack Pope <jackpope1@gmail.com>
Fixes an edge case where a function expression would fail to take a
dependency if it referenced a hoisted `const` inferred as a primitive
value. We were incorrectly skipping primitve-typed operands when
determing scopes for merging in InferReactiveScopeVariables.
This was super tricky to debug, for posterity the trick is that Context
variables (StoreContext etc) are modeled just like a mutable object,
where assignment to the variable is equivalent to `object.value = ...`
and reading the variable is equivalent to `object.value` property
access. Comparing to an equivalent version of the repro case replaced
with an object and property read/writes showed that everything was
exactly right, except that InferReactiveScopeVariables wasn't merging
the scopes of the function and the context variable, which led me right
to the problematic line.
Closes#35122
Adds a new `enableUseKeyedState` compiler flag that changes the error
message for unconditional setState calls during render.
When `enableUseKeyedState` is enabled, the error recommends using
`useKeyedState(initialState, key)` to reset state when dependencies
change. When disabled (the default), it links to the React docs for the
manual pattern of storing previous values in state.
Both error messages now include helpful bullet points explaining the two
main alternatives:
1. Use useKeyedState (or manual pattern) to reset state when other
state/props change
2. Compute derived data directly during render without using state
ValidateNoSetStateInEffects already supports transitive setter
functions. This PR marks any synchonous state setter useEffectEvent
function so we can validate that uEE isn't being used only as
misdirection to avoid the validation within an effect body.
The error points to the call of the effect event.
Example:
```js
export default function MyApp() {
const [count, setCount] = useState(0)
const effectEvent = useEffectEvent(() => {
setCount(10)
})
useEffect(() => {
effectEvent()
}, [])
return <div>{count}</div>;
```
```
Found 1 error:
Error: Calling setState synchronously within an effect can trigger cascading renders
Effects are intended to synchronize state between React and external systems such as manually updating the DOM, state management libraries, or other platform APIs. In general, the body of an effect should do one or both of the following:
* Update external systems with the latest state from React.
* Subscribe for updates from some external system, calling setState in a callback function when external state changes.
Calling setState synchronously within an effect body causes cascading renders that can hurt performance, and is not recommended. (https://react.dev/learn/you-might-not-need-an-effect).
5 | })
6 | useEffect(() => {
> 7 | effectEvent()
| ^^^^^^^^^^^ Avoid calling setState() directly within an effect
8 | }, [])
9 | return <div>{count}</div>;
10 | }
```
First, this adds some more tests and organizes them into an
`exhaustive-deps/` subdirectory.
Second, the diagnostics are overhauled. For each memo block we now
report a single diagnostic which summarizes the issue, plus individual
errors for each missing/extra dependency. Within the extra deps, we
distinguish whether it's truly extra vs whether its just a more (too)
precise version of an inferred dep. For example, if you depend on
`x.y.z` but the inferred dep was `x.y`. Finally, we print the full
inferred deps at the end as a hint (it's also a suggestion, but this
makes it more clear what would be suggested).
Enables `@validateExhaustiveMemoizationDependencies` feature flag by
default, and disables it in select tests that failed due to the change.
Some of our tests intentionally use incorrect memo dependencies in order
to test edge cases.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35201).
* #35213
* __->__ #35201
In ValidateExhaustiveDependencies, I previously changed to allow
extraneous dependencies as long as they were non-reactive. Here we make
that more precise, and distinguish between values that are definitely
referenced in the memo function but optional as dependencies vs values
that are not even referenced in the memo function. The latter now error
as extraneous even if they're non-reactive. This also turned up a case
where constant-folded primitives could show up as false positives of the
latter category, so now we track manual deps which quality for constant
folding and don't error on them.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35204).
* #35213
* #35201
* __->__ #35204
Similar to ValidateHookUsage, we implement this check in the compiler
for safety but (for now) continue to rely on the existing rule for
actually reporting errors to users.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35192).
* #35201
* #35202
* __->__ #35192
The existing exhaustive-deps rule allows omitting non-reactive
dependencies, even if they're not memoized. Conceptually, if a value is
non-reactive then it cannot semantically change. Even if the value is a
new object, that object represents the exact same value and doesn't
necessitate redoing downstream computation. Thus its fine to exclude
nonreactive dependencies, whether they're a stable type or not.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35190).
* #35201
* #35202
* #35192
* __->__ #35190
Since adding this validation we've already changed our inference to use
knowledge from manual memoization to inform when values are frozen and
which values are non-nullable. To align with that, if the user chooses
to use different optionality btw the deps and the memo block/callback,
that's fine. The key is that eg `x?.y` will invalidate whenever `x.y`
would, so from a memoization correctness perspective its fine. It's not
our job to be a type checker: if a value is potentially nullable, it
should likely use a nullable property access in both places but
TypeScript/Flow can check that.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35186).
* #35201
* #35202
* #35192
* #35190
* __->__ #35186
When checking ValidateExhaustiveDeps internally, this seems to be the
most common case that it flags. The current exhaustive-deps rule allows
extraneous deps if they are a set of stable types. So here we reuse our
existing isStableType() util in the compiler to allow this case.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35185).
* #35201
* #35202
* #35192
* #35190
* #35186
* __->__ #35185
With `ValidateExhaustiveMemoDependencies` we can now check exhaustive
dependencies for useMemo and useCallback within the compiler, without
relying on the separate exhaustive-deps rule. Until now we've bailed out
of any component/hook that suppresses this rule, since the suppression
_might_ affect a memoization value. Compiling code with incorrect memo
deps can change behavior so this wasn't safe. The downside was that a
suppression within a useEffect could prevent memoization, even though
non-exhaustive deps for effects do not cause problems for memoization
specifically.
So here, we change to ignore ESLint suppressions if we have both the
compiler's hooks validation and memo deps validations enabled.
Now we just have to test out the new validation and refine before we can
enable this by default.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35184).
* #35201
* #35202
* #35192
* #35190
* #35186
* #35185
* __->__ #35184
Records more information in DropManualMemoization so that we know the
full span of the manual dependencies array (if present). This allows
ValidateExhaustiveDeps to include a suggestion with the correct deps.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34471).
* #34472
* __->__ #34471
The compiler currently drops manual memoization and rewrites it using
its own inference. If the existing manual memo dependencies has missing
or extra dependencies, compilation can change behavior by running the
computation more often (if deps were missing) or less often (if there
were extra deps). We currently address this by relying on the developer
to use the ESLint plugin and have `eslint-disable-next-line
react-hooks/exhaustive-deps` suppressions in their code. If a
suppression exists, we skip compilation.
But not everyone is using the linter! Relying on the linter is also
imprecise since it forces us to bail out on exhaustive-deps checks that
only effect (ahem) effects — and while it isn't good to have incorrect
deps on effects, it isn't a problem for compilation.
So this PR is a rough sketch of validating manual memoization
dependencies in the compiler. Long-term we could use this to also check
effect deps and replace the ExhaustiveDeps lint rule, but for now I'm
focused specifically on manual memoization use-cases. If this works, we
can stop bailing out on ESLint suppressions, since the compiler will
implement all the appropriate checks (we already check rules of hooks).
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34394).
* #34472
* #34471
* __->__ #34394
This deprecates the `noEmit: boolean` flag and adds `outputMode:
'client' | 'client-no-memo' | 'ssr' | 'lint'` as the replacement.
OutputMode defaults to null and takes precedence if specified, otherwise
we use 'client' mode for noEmit=false and 'lint' mode for noEmit=true.
Key points:
* Retrying failed compilation switches from 'client' mode to
'client-no-memo'
* Validations are enabled behind
Environment.proto.shouldEnableValidations, enabled for all modes except
'client-no-memo'. Similar for dropping manual memoization.
* OptimizeSSR is now gated by the outputMode==='ssr', not a feature flag
* Creation of reactive scopes, and related codegen logic, is now gated
by outputMode==='client'
Just a quick poc:
* Inline useState when the initializer is known to not be a function.
The heuristic could be improved but will handle a large number of cases
already.
* Prune effects
* Prune useRef if the ref is unused, by pruning 'ref' props on primitive
components. Then DCE does the rest of the work - with a small change to
allow `useRef()` calls to be dropped since function calls aren't
normally eligible for dropping.
* Prune event handlers, by pruning props whose names start w "on" from
primitive components. Then DCE removes the functions themselves.
Per the fixture, this gets pretty far.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35102).
* #35112
* __->__ #35102
Summary:
I missed this conditional messing things up for undefined useState()
calls. We should be tracking them.
I also missed a test that expect an error was not throwing.
Test Plan:
Update broken test
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35174).
* __->__ #35174
* #35173
Summary:
The operands of a function expression are the elements passed as
context. This means that it doesn't make sense to record mutations for
them.
The relevant mutations will happen in the function body, so we need to
prevent FunctionExpression type instruction from running the logic for
effect mutations.
This was also causing some values to depend on themselves in some cases
triggering an infinite loop. Also added n invariant to prevent this
issue
Test Plan:
Added fixture test
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35173).
* #35174
* __->__ #35173
