* Move renderer `act` to work loop
* Delete `flushSuspenseFallbacksInTests`
This was meant to be a temporary hack to unblock the `act` work, but it
quickly spread throughout our tests.
What it's meant to do is force fallbacks to flush inside `act` even in
Concurrent Mode. It does this by wrapping the `setTimeout` call in a
check to see if it's in an `act` context. If so, it skips the delay and
immediately commits the fallback.
Really this is only meant for our internal React tests that need to
incrementally render. Nobody outside our team (and Relay) needs to do
that, yet. Even if/when we do support that, it may or may not be with
the same `flushAndYield` pattern we use internally.
However, even for our internal purposes, the behavior isn't right
because a really common reason we flush work incrementally is to make
assertions on the "suspended" state, before the fallback has committed.
There's no way to do that from inside `act` with the behavior of this
flag, because it causes the fallback to immediately commit. This has led
us to *not* use `act` in a lot of our tests, or to write code that
doesn't match what would actually happen in a real environment.
What we really want is for the fallbacks to be flushed at the *end` of
the `act` scope. Not within it.
This only affects the noop and test renderer versions of `act`, which
are implemented inside the reconciler. Whereas `ReactTestUtils.act` is
implemented in "userspace" for backwards compatibility. This is fine
because we didn't have any DOM Suspense tests that relied on this flag;
they all use test renderer or noop.
In the future, we'll probably want to move always use the reconciler
implementation of `act`. It will not affect the prod bundle, because we
currently only plan to support `act` in dev. Though we still haven't
completely figured that out. However, regardless of whether we support a
production `act` for users, we'll still need to write internal React
tests in production mode. For that use case, we'll likely add our own
internal version of `act` that assumes a mock Scheduler and might rely
on hacks that don't 100% align up with the public one.
* Migrate conditional tests to gate pragma
I searched through the codebase for this pattern:
```js
describe('test suite', () => {
if (!__EXPERIMENTAL__) { // or some other condition
test("empty test so Jest doesn't complain", () => {});
return;
}
// Unless we're in experimental mode, none of the tests in this block
// will run.
})
```
and converted them to the `@gate` pragma instead.
The reason this pattern isn't preferred is because you end up disabling
more tests than you need to.
* Add flag for www release channels
Using a heuristic where I check a flag that is known to only be enabled
in www. I left a TODO to instead set the release channel explicitly in
each test config.
* Add more edge cases to fixture
Also adjust some expectations. I think the column should ideally be 1 but varies.
The Example row is one line off because it throws on the hook but should ideally be the component.
Similarly class components with constructors may have the line in the constructor.
* Account for the construct call taking a stack frame
We do this by first searching for the first different frame, then find
the same frames and then find the first different frame again.
* Throw controls
Otherwise they don't get a stack frame associated with them in IE.
* Protect against generating stacks failing
Errors while generating stacks will bubble to the root. Since this technique
is a bit sketchy, we should probably protect against it.
* Don't construct the thing that throws
Instead, we pass the prototype as the "this". It's new every time anyway.
* Implement component stack extraction hack
* Normalize errors in tests
This drops the requirement to include owner to pass the test.
* Special case tests
* Add destructuring to force toObject which throws before the side-effects
This ensures that we don't double call yieldValue or advanceTime in tests.
Ideally we could use empty destructuring but ES lint doesn't like it.
* Cache the result in DEV
In DEV it's somewhat likely that we'll see many logs that add component
stacks. This could be slow so we cache the results of previous components.
* Fixture
* Add Reflect to lint
* Log if out of range.
* Fix special case when the function call throws in V8
In V8 we need to ignore the first line. Normally we would never get there
because the stacks would differ before that, but the stacks are the same if
we end up throwing at the same place as the control.
Some of our internal reconciler types have leaked into other packages.
Usually, these types are treated as opaque; we don't read and write
to its fields. This is good.
However, the type is often passed back to a reconciler method. For
example, React DOM creates a FiberRoot with `createContainer`, then
passes that root to `updateContainer`. It doesn't do anything with the
root except pass it through, but because `updateContainer` expects a
full FiberRoot, React DOM is still coupled to all its fields.
I don't know if there's an idiomatic way to handle this in Flow. Opaque
types are simlar, but those only work within a single file. AFAIK,
there's no way to use a package as the boundary for opaqueness.
The immediate problem this presents is that the reconciler refactor will
involve changes to our internal data structures. I don't want to have to
fork every single package that happens to pass through a Fiber or
FiberRoot, or access any one of its fields. So my current plan is to
share the same Flow type across both forks. The shared type will be a
superset of each implementation's type, e.g. Fiber will have both an
`expirationTime` field and a `lanes` field. The implementations will
diverge, but not the types.
To do this, I lifted the type definitions into a separate module.
* Drop the .internal.js suffix on some files that don't need it anymore
* Port some ops patterns to scheduler yield
* Fix triangle test to avoid side-effects in constructor
* Move replaying of setState updaters until after the effect
Otherwise any warnings get silenced if they're deduped.
* Drop .internal.js in more files
* Don't check propTypes on a simple memo component unless it's lazy
Comparing the elementType doesn't work for this because it will never be
the same for a simple element.
This caused us to double validate these. This was covered up because in
internal tests this was deduped since they shared the prop types cache
but since we now inline it, it doesn't get deduped.
* Disable console log during the second rerender
* Use the disabled log to avoid double yielding values in scheduler mock
* Reenable debugRenderPhaseSideEffectsForStrictMode in tests that can
* Filter certain DOM attributes (e.g. src, href) if their values are empty strings
This prevents e.g. <img src=""> from making an unnecessar HTTP request for certain browsers.
* Expanded warning recommendation
* Improved error message
* Further refined error message
* Add useOpaqueIdentifier Hook
We currently use unique IDs in a lot of places. Examples are:
* `<label for="ID">`
* `aria-labelledby`
This can cause some issues:
1. If we server side render and then hydrate, this could cause an
hydration ID mismatch
2. If we server side render one part of the page and client side
render another part of the page, the ID for one part could be
different than the ID for another part even though they are
supposed to be the same
3. If we conditionally render something with an ID , this might also
cause an ID mismatch because the ID will be different on other
parts of the page
This PR creates a new hook `useUniqueId` that generates a different
unique ID based on whether the hook was called on the server or client.
If the hook is called during hydration, it generates an opaque object
that will rerender the hook so that the IDs match.
Co-authored-by: Andrew Clark <git@andrewclark.io>
* Add feature flag
* Split stack from current fiber
You can get stack from any fiber, not just current.
* Refactor description of component frames
These should use fiber tags for switching. This also puts the relevant code
behind DEV flags.
* We no longer expose StrictMode in component stacks
They're not super useful and will go away later anyway.
* Update tests
Context is no longer part of SSR stacks. This was already the case on the
client.
forwardRef no longer is wrapped on the stack. It's still in getComponentName
but it's probably just noise in stacks. Eventually we'll remove the wrapper
so it'll go away anyway. If we use native stack frames they won't have this
extra wrapper.
It also doesn't pick up displayName from the outer wrapper. We could maybe
transfer it but this will also be fixed by removing the wrapper.
* Forward displayName onto the inner function for forwardRef and memo in DEV
This allows them to show up in stack traces.
I'm not doing this for lazy because lazy is supposed to be called on the
consuming side so you shouldn't assign it a name on that end. Especially
not one that mutates the inner.
* Use multiple instances of the fake component
We mutate the inner component for its name so we need multiple copies.
* Enable prefer-const rule
Stylistically I don't like this but Closure Compiler takes advantage of
this information.
* Auto-fix lints
* Manually fix the remaining callsites
`onInput` behaves the same as `onChange` for controlled inputs as far as I
know, so React should not print the following warning when `onInput` is
present.
> Failed prop type: You provided a `value` prop to a form field without an `onChange` handler. This will render a read-only field. If the field should be mutable use `defaultValue`. Otherwise, set either `onChange` or `readOnly`.
* add email input fixture to show cursor jump
* fix cursor jump in email input
Co-authored-by: Peter Potapov <dr.potapoff-peter@yandex.ru>
* add regression tests to ensure attributes are working
Co-authored-by: Peter Potapov <dr.potapoff-peter@yandex.ru>
* Revert "ReactDOM.useEvent: enable on internal www and add inspection test (#18395)"
This reverts commit e0ab1a429d.
* Revert "ReactDOM.useEvent: Add support for experimental scopes API (#18375)"
This reverts commit a16b349745.
* ReactDOM.useEvent: Add support for experimental scopes API
