* [Flight] Move from suspensey readRoot() to use(thenable)
* Update noop tests
These are no longer sync so they need some more significant updating.
Some of these tests are written in a non-idiomatic form too which is not
great.
* Update Relay tests
I kept these as sync for now and just assume a sync Promise.
* Updated the main tests
* Gate tests
* We need to cast through any because Thenable doesn't support unknown strings
* Add fixture for comparing baseline render perf for renderToString and renderToPipeableStream
Modified from ssr2 and https://github.com/SuperOleg39/react-ssr-perf-test
* Implement buffering in pipeable streams
The previous implementation of pipeable streaming (Node) suffered some performance issues brought about by the high chunk counts and innefficiencies with how node streams handle this situation. In particular the use of cork/uncork was meant to alleviate this but these methods do not do anything unless the receiving Writable Stream implements _writev which many won't.
This change adopts the view based buffering techniques previously implemented for the Browser execution context. The main difference is the use of backpressure provided by the writable stream which is not implementable in the other context. Another change to note is the use of standards constructs like TextEncoder and TypedArrays.
* Implement encodeInto during flushCompletedQueues
encodeInto allows us to write directly to the view buffer that will end up getting streamed instead of encoding into an intermediate buffer and then copying that data.
* I forgot to call onFatalError
I can't figure out how to write a test for this because it only happens
when there is a bug in React itself which would then be fixed if we found
it.
We're also covered by the protection of ReadableStream which doesn't leak
other errors to us.
* Abort requests if the reader cancels
No need to continue computing at this point.
* Abort requests if node streams get destroyed
This is if the downstream cancels is for example.
* Rename Node APIs for Parity with allReady
The "Complete" terminology is a little misleading because not everything
has been written yet. It's just "Ready" to be written now.
onShellReady
onShellError
onAllReady
* 'close' should be enough
* Move createRoot/hydrateRoot to /client
We want these APIs ideally to be imported separately from things you
might use in arbitrary components (like flushSync). Those other methods
are "isomorphic" to how the ReactDOM tree is rendered. Similar to hooks.
E.g. importing flushSync into a component that only uses it on the client
should ideally not also pull in the entry client implementation on the
server.
This also creates a nicer parity with /server where the roots are in a
separate entry point.
Unfortunately, I can't quite do this yet because we have some legacy APIs
that we plan on removing (like findDOMNode) and we also haven't implemented
flushSync using a flag like startTransition does yet.
Another problem is that we currently encourage these APIs to be aliased by
/profiling (or unstable_testing). In the future you don't have to alias
them because you can just change your roots to just import those APIs and
they'll still work with the isomorphic forms. Although we might also just
use export conditions for them.
For that all to work, I went with a different strategy for now where the
real API is in / but it comes with a warning if you use it. If you instead
import /client it disables the warning in a wrapper. That means that if you
alias / then import /client that will inturn import the alias and it'll
just work.
In a future breaking changes (likely when we switch to ESM) we can just
remove createRoot/hydrateRoot from / and move away from the aliasing
strategy.
* Update tests to import from react-dom/client
* Fix fixtures
* Update warnings
* Add test for the warning
* Update devtools
* Change order of react-dom, react-dom/client alias
I think the order matters here. The first one takes precedence.
* Require react-dom through client so it can be aliased
Co-authored-by: Andrew Clark <git@andrewclark.io>
This indicates that an error has happened before the shell completed and
there's no point in emitting the result of this stream.
This is not quite the same as other fatal errors that can happen even
after streaming as started.
It's also not quite the same as onError before onCompleteShell because
onError can be called for an error inside a Suspense boundary before the
shell completes.
Implement shell error handling in Node SSR fixtures
Instead of hanging indefinitely.
Update Browser Fixture
Expose onErrorShell to the Node build
This API is not Promisified so it's just a separate callback instead.
Promisify the Browser Fizz API
It's now a Promise of a readable stream. The Promise resolves when the
shell completes. If the shell errors, the Promise is rejected.
* Fix missing key warning
* Add build instructions
* Update interpretation now that React 17 is latest stable and 18 is next
* Ignore ReactDOM.render deprecation warning
* Ensure a server implementation with `renderToString` is used
* Update AttributeTableSnapshot
* Ensure Popover doesn't overflow
* Add option to inject bootstrap scripts
These are emitted right after the shell as flushed.
* Update ssr fixtures to use bootstrapScripts instead of manual script tag
* Add option to FB renderer too
* Rename pipeToNodeWritable to renderToNodePipe
* Add startWriting API to Flight
We don't really need it in this case because there's way less reason to
delay the stream in Flight.
* Pass the destination to startWriting instead of renderToNode
* Rename startWriting to pipe
This mirrors the ReadableStream API in Node
* Error codes
* Rename to renderToPipeableStream
This mimics the renderToReadableStream API for the browser.
* Revise ESLint rules for string coercion
Currently, react uses `'' + value` to coerce mixed values to strings.
This code will throw for Temporal objects or symbols.
To make string-coercion safer and to improve user-facing error messages,
This commit adds a new ESLint rule called `safe-string-coercion`.
This rule has two modes: a production mode and a non-production mode.
* If the `isProductionUserAppCode` option is true, then `'' + value`
coercions are allowed (because they're faster, although they may
throw) and `String(value)` coercions are disallowed. Exception:
when building error messages or running DEV-only code in prod
files, `String()` should be used because it won't throw.
* If the `isProductionUserAppCode` option is false, then `'' + value`
coercions are disallowed (because they may throw, and in non-prod
code it's not worth the risk) and `String(value)` are allowed.
Production mode is used for all files which will be bundled with
developers' userland apps. Non-prod mode is used for all other React
code: tests, DEV blocks, devtools extension, etc.
In production mode, in addiiton to flagging `String(value)` calls,
the rule will also flag `'' + value` or `value + ''` coercions that may
throw. The rule is smart enough to silence itself in the following
"will never throw" cases:
* When the coercion is wrapped in a `typeof` test that restricts to safe
(non-symbol, non-object) types. Example:
if (typeof value === 'string' || typeof value === 'number') {
thisWontReport('' + value);
}
* When what's being coerced is a unary function result, because unary
functions never return an object or a symbol.
* When the coerced value is a commonly-used numeric identifier:
`i`, `idx`, or `lineNumber`.
* When the statement immeidately before the coercion is a DEV-only
call to a function from shared/CheckStringCoercion.js. This call is a
no-op in production, but in DEV it will show a console error
explaining the problem, then will throw right after a long explanatory
code comment so that debugger users will have an idea what's going on.
The check function call must be in the following format:
if (__DEV__) {
checkXxxxxStringCoercion(value);
};
Manually disabling the rule is usually not necessary because almost all
prod use of the `'' + value` pattern falls into one of the categories
above. But in the rare cases where the rule isn't smart enough to detect
safe usage (e.g. when a coercion is inside a nested ternary operator),
manually disabling the rule will be needed.
The rule should also be manually disabled in prod error handling code
where `String(value)` should be used for coercions, because it'd be
bad to throw while building an error message or stack trace!
The prod and non-prod modes have differentiated error messages to
explain how to do a proper coercion in that mode.
If a production check call is needed but is missing or incorrect
(e.g. not in a DEV block or not immediately before the coercion), then
a context-sensitive error message will be reported so that developers
can figure out what's wrong and how to fix the problem.
Because string coercions are now handled by the `safe-string-coercion`
rule, the `no-primitive-constructor` rule no longer flags `String()`
usage. It still flags `new String(value)` because that usage is almost
always a bug.
* Add DEV-only string coercion check functions
This commit adds DEV-only functions to check whether coercing
values to strings using the `'' + value` pattern will throw. If it will
throw, these functions will:
1. Display a console error with a friendly error message describing
the problem and the developer can fix it.
2. Perform the coercion, which will throw. Right before the line where
the throwing happens, there's a long code comment that will help
debugger users (or others looking at the exception call stack) figure
out what happened and how to fix the problem.
One of these check functions should be called before all string coercion
of user-provided values, except when the the coercion is guaranteed not
to throw, e.g.
* if inside a typeof check like `if (typeof value === 'string')`
* if coercing the result of a unary function like `+value` or `value++`
* if coercing a variable named in a whitelist of numeric identifiers:
`i`, `idx`, or `lineNumber`.
The new `safe-string-coercion` internal ESLint rule enforces that
these check functions are called when they are required.
Only use these check functions in production code that will be bundled
with user apps. For non-prod code (and for production error-handling
code), use `String(value)` instead which may be a little slower but will
never throw.
* Add failing tests for string coercion
Added failing tests to verify:
* That input, select, and textarea elements with value and defaultValue
set to Temporal-like objects which will throw when coerced to string
using the `'' + value` pattern.
* That text elements will throw for Temporal-like objects
* That dangerouslySetInnerHTML will *not* throw for Temporal-like
objects because this value is not cast to a string before passing to
the DOM.
* That keys that are Temporal-like objects will throw
All tests above validate the friendly error messages thrown.
* Use `String(value)` for coercion in non-prod files
This commit switches non-production code from `'' + value` (which
throws for Temporal objects and symbols) to instead use `String(value)`
which won't throw for these or other future plus-phobic types.
"Non-produciton code" includes anything not bundled into user apps:
* Tests and test utilities. Note that I didn't change legacy React
test fixtures because I assumed it was good for those files to
act just like old React, including coercion behavior.
* Build scripts
* Dev tools package - In addition to switching to `String`, I also
removed special-case code for coercing symbols which is now
unnecessary.
* Add DEV-only string coercion checks to prod files
This commit adds DEV-only function calls to to check if string coercion
using `'' + value` will throw, which it will if the value is a Temporal
object or a symbol because those types can't be added with `+`.
If it will throw, then in DEV these checks will show a console error
to help the user undertsand what went wrong and how to fix the
problem. After emitting the console error, the check functions will
retry the coercion which will throw with a call stack that's easy (or
at least easier!) to troubleshoot because the exception happens right
after a long comment explaining the issue. So whether the user is in
a debugger, looking at the browser console, or viewing the in-browser
DEV call stack, it should be easy to understand and fix the problem.
In most cases, the safe-string-coercion ESLint rule is smart enough to
detect when a coercion is safe. But in rare cases (e.g. when a coercion
is inside a ternary) this rule will have to be manually disabled.
This commit also switches error-handling code to use `String(value)`
for coercion, because it's bad to crash when you're trying to build
an error message or a call stack! Because `String()` is usually
disallowed by the `safe-string-coercion` ESLint rule in production
code, the rule must be disabled when `String()` is used.
Update all our local scripts to use `build` instead of `build2`.
There are still downstream scripts that depend on `build2`, though, so
we can't remove it yet.
Moves the RELEASE_CHANNEL_stable_yarn_test_dom_fixtures job to our new,
combined CI workflow.
After this, there are only two jobs remaining to be migrated. Then we
can delete the old workflow and build script.
* Fix#21972: Add `onResize` event to video elements
This is a simple fix for #21972 that adds support for the `onResize` media event.
I created a separate `videoEventTypes` array since I doubt anyone will want to add `onResize` to an audio event. It would simplify the code a bit to just add `resize` to the `mediaEventTypes` array, if that’s preferred.
Pre-commit checklist ([source](https://reactjs.org/docs/how-to-contribute.html#sending-a-pull-request))
✅ Fork the repository and create your branch from `main`.
✅ Run `yarn` in the repository root.
✅ If you’ve fixed a bug or added code that should be tested, add tests!
✅ Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch TestName` is helpful in development.
✅ Run `yarn test --prod` to test in the production environment.
✅ If you need a debugger, run `yarn debug-test --watch TestName`, open chrome://inspect, and press “Inspect”.
✅ Format your code with prettier (`yarn prettier`).
✅ Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only check changed files.
✅ Run the Flow typechecks (`yarn flow`).
✅ If you haven’t already, complete the CLA.
* Consolidate `videoEventTypes` array into `mediaEventTypes`
Currently, in a React 18 root, `act` only works if you mock the
Scheduler package. This was because we didn't want to add additional
checks at runtime.
But now that the `act` testing API is dev-only, we can simplify its
implementation.
Now when an update is wrapped with `act`, React will bypass Scheduler
entirely and push its tasks onto a special internal queue. Then, when
the outermost `act` scope exists, we'll flush that queue.
I also removed the "wrong act" warning, because the plan is to move
`act` to an isomorphic entry point, simlar to `startTransition`. That's
not directly related to this PR, but I didn't want to bother
re-implementing that warning only to immediately remove it.
I'll add the isomorphic API in a follow up.
Note that the internal version of `act` that we use in our own tests
still depends on mocking the Scheduler package, because it needs to work
in production. I'm planning to move that implementation to a shared
(internal) module, too.
Upgrades the deprecation warning to a runtime error.
I did it this way instead of removing the export so the type is the same
in both builds. It will get dead code eliminated regardless.
* Use the server src files as entry points for the builds/tests
We need one top level entry point to target two builds so we can't have
the top level one be the entry point for the builds.
* Same thing but with the modern entry point
