When you schedule a microtask from render or effect and then call
setState (or ping) from there, the "event" is the event that React
scheduled (which will be a postMessage). The event time of this new
render will be before the last render finished.
We usually clamp these but in this scenario the update doesn't happen
while a render is happening. Causing overlapping events.
Before:
<img width="1229" alt="Screenshot 2024-11-12 at 11 01 30 PM"
src="https://github.com/user-attachments/assets/9652cf3b-b358-453c-b295-1239cbb15952">
Therefore when we finalize a render we need to store the end of the last
render so when we a new update comes in later with an event time earlier
than that, we know to clamp it.
There's also a special case here where when we enter the
`RootDidNotComplete` or `RootSuspendedWithDelay` case we neither leave
the root as in progress nor commit it. Those needs to finalize too.
Really this should be modeled as a suspended track that we haven't added
yet. That's the gap between "Blocked" and "message" below.
After:
<img width="1471" alt="Screenshot 2024-11-13 at 12 31 34 AM"
src="https://github.com/user-attachments/assets/b24f994e-9055-4b10-ad29-ad9b36302ffc">
I also fixed an issue where we may log the same event name multiple
times if we're rendering more than once in the same event. In this case
I just leave a blank trace between the last commit and the next update.
I also adding ignoring of the "message" event at all in these cases when
the event is from React's scheduling itself.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
In order to adopt react 19's ref-as-prop model, Flow needs to eliminate
all the places where they are treated differently.
`React.AbstractComponent` is the worst example of this, and we need to
eliminate it.
This PR eliminates them from the react repo, and only keeps the one that
has 1 argument of props.
## How did you test this change?
yarn flow
## Summary
The React Native Renderer exports a
`__SECRET_INTERNALS_DO_NOT_USE_OR_YOU_WILL_BE_FIRED` property with a
single method that has no remaining call sites:
`computeComponentStackForErrorReporting`
This PR cleans up this unused export.
## How did you test this change?
```
$ yarn
$ yarn flow fabric
$ yarn test
```
## Summary
Creates a new `HostInstance` type for React Native, to more accurately
capture the intent most developers have when using the `NativeMethods`
type or `React.ElementRef<HostComponent<T>>`.
Since `React.ElementRef<HostComponent<T>>` is typed as
`React.AbstractComponent<T, NativeMethods>`, that means
`React.ElementRef<HostComponent<T>>` is equivalent to `NativeMethods`
which is equivalent to `HostInstance`.
## How did you test this change?
```
$ yarn
$ yarn flow fabric
```
React DevTools no longer operates with just Fibers, it now builds its
own Shadow Tree, which represents the tree on the Host (Fabric on
Native, DOM on Web).
We have to keep track of public instances for a select-to-inspect
feature. We've recently changed this logic in
https://github.com/facebook/react/pull/30831, and looks like we've been
incorrectly getting a public instance for Fabric case.
Not only this, turns out that all `getInspectorData...` APIs are
returning Fibers, and not public instances. I have to expose it, so that
React DevTools can correctly identify the element, which was selected.
Changes for React Native are in
[D63421463](https://www.internalfb.com/diff/D63421463)
This tracks the current window.event.timeStamp the first time we
setState or call startTransition. For either the blocking track or
transition track. We can use this to show how long we were blocked by
other events or overhead from when the user interacted until we got
called into React.
Then we track the time we start awaiting a Promise returned from
startTransition. We can use this track how long we waited on an Action
to complete before setState was called.
Then finally we track when setState was called so we can track how long
we were blocked by other word before we could actually start rendering.
For a Transition this might be blocked by Blocking React render work.
We only log these once a subsequent render actually happened. If no
render was actually scheduled, then we don't log these. E.g. if an
isomorphic Action doesn't call startTransition there's no render so we
don't log it.
We only log the first event/update/transition even if multiple are
batched into it later. If multiple Actions are entangled they're all
treated as one until an update happens. If no update happens and all
entangled actions finish, we clear the transition so that the next time
a new sequence starts we can log it.
We also clamp these (start the track later) if they were scheduled
within a render/commit. Since we share a single track we don't want to
create overlapping tracks.
The purpose of this is not to show every event/action that happens but
to show a prelude to how long we were blocked before a render started.
So you can follow the first event to commit.
<img width="674" alt="Screenshot 2024-09-20 at 1 59 58 AM"
src="https://github.com/user-attachments/assets/151ba9e8-6b3c-4fa1-9f8d-e3602745eeb7">
I still need to add the rendering/suspended phases to the timeline which
why this screenshot has a gap.
<img width="993" alt="Screenshot 2024-09-20 at 12 50 27 AM"
src="https://github.com/user-attachments/assets/155b6675-b78a-4a22-a32b-212c15051074">
In this case it's a Form Action which started a render into the form
which then suspended on the action. The action then caused a refresh,
which interrupts with its own update that's blocked before rendering.
Suspended roots like this is interesting because we could in theory
start working on a different root in the meantime which makes this
timeline less linear.
## Summary
This PR bumps Flow all the way to the latest 0.245.2.
Most of the suppressions comes from Flow v0.239.0's change to include
undefined in the return of `Array.pop`.
I also enabled `react.custom_jsx_typing=true` and added custom jsx
typing to match the old behavior that `React.createElement` is
effectively any typed. This is necessary since various builtin
components like `React.Fragment` is actually symbol in the React repo
instead of `React.AbstractComponent<...>`. It can be made more accurate
by customizing the `React$CustomJSXFactory` type, but I will leave it to
the React team to decide.
## How did you test this change?
`yarn flow` for all the renderers
## Summary
Flow will eventually remove the specific `React.Element` type. For most
of the code, it can be replaced with `React.MixedElement` or
`React.Node`.
When specific react elements are required, it needs to be replaced with
either `React$Element` which will trigger a `internal-type` lint error
that can be disabled project-wide, or use
`ExactReactElement_DEPRECATED`.
Fortunately in this case, this one can be replaced with just
`React.MixedElement`.
## How did you test this change?
`flow`
## Summary
As promised on https://github.com/facebook/react/pull/29627, this
creates a unit test for the `findNodeHandle` error that prevents
developers from calling it within render methods.
## How did you test this change?
```
$ yarn test ReactFabric-test.internal.js
```
Persistent renderers used the `Update` effect flag to check if a subtree
needs to be cloned. In some cases, that causes extra renders, such as
when a layout effect is triggered which only has an effect on the JS
side, but doesn't update the host components.
It's been a bit tricky to find the right places where this needs to be
set and I'm not 100% sure I got all the cases even though the tests
passed.
We use static dependency injection. We shouldn't use this dynamic
dependency injection we do for DevTools internals. There's also meta
programming like spreading and stuff that isn't needed.
This moves the config from `injectIntoDevTools` to the FiberConfig so it
can be statically resolved.
Closure Compiler has some trouble generating optimal code for this
anyway so ideally we'd refactor this further but at least this is better
and saves a few bytes and avoids some code paths (when minified).
There is currently a mismatch in how the persistent mode JS API and the
Fabric native code interpret `completeRoot`.
This is a short-lived experiment to see the effect of moving the Fabric
`completeRoot` call from `finalizeContainerChildren` to
`replaceContainerChildren` which in some cases does not get called.
## Summary
This PR fixes the `fastAddProperties` function. Now it nullifies a prop
if it was defined in one of the items of a style array, but then set to
`undefined` or `null` in one of the subsequent items. E.g. `style:
[{top: 0}, {top: undefined}]` should evaluate to `{top: null}`. Also
added a test case for that.
## How did you test this change?
```
yarn test packages/react-native-renderer -r=xplat --variant=false
yarn test packages/react-native-renderer -r=xplat --variant=true
yarn flow native
```
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Now that HostContext determination for Fabric is a DEV-only behavior, we
can move the HostContext determination to resolve from the ViewConfig
for a given type. Doing this will allow arbitrary types to register
themselves as potential parents of raw text string children. This is the
first of two diffs for react as we'll:
1. Add the new property to the ViewConfig types
2. Update React Native to include the `supportsRawText` property for
`RCTText`, `RCTVirtualText`, `AndroidTextInput`, etc.
3. Switch the behavior of react to read from the ViewConfig rather than
a static list of types.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
- yarn test
- yarn test --prod
- Pulled change into react-native, added `supportsRawText` props to
RCTText, RCTVirtualText, etc. ViewConfigs and confirmed everything type
checks.
For environments that still have legacy contexts available, this adds a
warning to make the remaining call sites easier to locate and encourage
upgrades.
The explicit mock override in this test was causing it to always run as
native-oss instead of also as xplat. This moves the test to use `//
@gate persistent` instead to run it in all persistent configs.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
In the Fabric renderer in React Native, we only use the HostContext to
issue soft errors in __DEV__ bundles when attempting to add a raw text
child to a node that may not support them. Moving the logic to set this
context to __DEV__ bundles only unblocks more expensive methods for
resolving whether a parent context supports raw text children, like
resolving this information from `getViewConfigForType`.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
yarn test (--prod)
That way we get owner stacks (native or otherwise) for `console.error`
or `console.warn` inside of them.
Since the `reportError` is also called within this context, we also get
them for errors thrown within event listeners. You'll also be able to
observe this in in the `error` event. Similar to how `onUncaughtError`
is in the scope of the instance that errored - even though
`onUncaughtError` doesn't kick in for event listeners.
Chrome (from console.createTask):
<img width="306" alt="Screenshot 2024-06-12 at 2 08 19 PM"
src="https://github.com/facebook/react/assets/63648/34cd9d57-0df4-44df-a470-e89a5dd1b07d">
<img width="302" alt="Screenshot 2024-06-12 at 2 03 32 PM"
src="https://github.com/facebook/react/assets/63648/678117b1-e03a-47d4-9989-8350212c8135">
Firefox (from React DevTools):
<img width="493" alt="Screenshot 2024-06-12 at 2 05 01 PM"
src="https://github.com/facebook/react/assets/63648/94ca224d-354a-4ec8-a886-5740bcb418e5">
(This is the parent stack since React DevTools doesn't just yet print
owner stack.)
(Firefox doesn't print the component stack for uncaught since we don't
add component stacks for "error" events from React DevTools - just
console.error. Perhaps an oversight.)
If we didn't have the synthetic event system this would kind of just
work natively in Chrome because we have this task active when we attach
the event listeners to the DOM node and async stacks just follow along
that way. In fact, if you attach a manual listener in useEffect you get
this same effect. It's just because we use event delegation that this
doesn't work.
However, if we did get rid of the synthetic event system we'd likely
still want to add a wrapper on the DOM node to set our internal current
owner so that the non-native part of the system still can observe the
active instance. That wouldn't work with manually attached listeners
though.
Basically make `console.error` and `console.warn` behave like normal -
when a component stack isn't appended. I need this because I need to be
able to print rich logs with the component stack option and to be able
to disable instrumentation completely in `console.createTask`
environments that don't need it.
Currently we can't print logs with richer objects because they're
toString:ed first. In practice, pretty much all arguments we log are
already toString:ed so it's not necessary anyway. Some might be like a
number. So it would only be a problem if some environment can't handle
proper consoles but then it's up to that environment to toString it
before logging.
The `Warning: ` prefix is historic and is both noisy and confusing. It's
mostly unnecessary since the UI surrounding `console.error` and
`console.warn` tend to have visual treatment around it anyway. However,
it's actively misleading when `console.error` gets prefixed with a
Warning that we consider an error level. There's an argument to be made
that some of our `console.error` don't make the bar for an error but
then the argument is to downgrade each of those to `console.warn` - not
to brand all our actual error logging with `Warning: `.
Apparently something needs to change in React Native before landing this
because it depends on the prefix somehow which probably doesn't make
sense already.
## Overview
Updates `eslint-plugin-jest` and enables the recommended rules with some
turned off that are unhelpful.
The main motivations is:
a) we have a few duplicated tests, which this found an I deleted
b) making sure we don't accidentally commit skipped tests
## Overview
Reverts https://github.com/facebook/react/pull/26616 and implements the
suggested way instead.
This change in #26616 broken the internal sync command, which now
results in duplicated `@generated` headers. It also makes it harder to
detect changes during the diff train sync. Instead, we will check for
changes, and if there are changes sign the files and commit them to the
sync branch.
## Strategy
The new sync strategy accounts for the generated headers during the
sync:
- **Revert Version**: Revert the version strings
- **Revert @generated**: Re-sign the files (will be the same hash as
before if unchanged)
- **Check**: Check if there are changes **if not, skip**
- **Re-apply Version**: Now add back the new version string
- **Re-sign @generated**: And re-generate the headers
Then commit to branch. This ensures that if there are no changes, we'll
skip.
---------
Co-authored-by: Timothy Yung <yungsters@gmail.com>
## Summary
We currently do deep diffing for object props, and also use custom
differs, if they are defined, for props with custom attribute config.
The idea is to simply do a `===` comparison instead of all that work. We
will do less computation on the JS side, but send more data to native.
The hypothesis is that this change should be neutral in terms of
performance. If that's the case, we'll be able to get rid of custom
differs, and be one step closer to deleting view configs.
This PR adds the `enableShallowPropDiffing` feature flag to support this
experiment.
## How did you test this change?
With `enableShallowPropDiffing` hardcoded to `true`:
```
yarn test packages/react-native-renderer
```
This fails on the following test cases:
- should use the diff attribute
- should do deep diffs of Objects by default
- should skip deeply-nested changed functions
Which makes sense with this change. These test cases should be deleted
if the experiment is shipped.
## Overview
We didn't have any tests that ran in persistent mode with the xplat
feature flags (for either variant).
As a result, invalid test gating like in
https://github.com/facebook/react/pull/29664 were not caught.
This PR adds test flavors for `ReactFeatureFlag-native-fb.js` in both
variants.
## Summary
This PR add tests for `ReactNativeAttributePayloadFabric.js`.
It introduces `ReactNativeAttributePayloadFabric-test.internal.js`,
which is a copy-paste of `ReactNativeAttributePayload-test.internal.js`.
On top of that, there is a bunch of new test cases for the
`ReactNativeAttributePayloadFabric.create` function.
## How did you test this change?
```
yarn test packages/react-native-renderer
```
This was missed in https://github.com/facebook/react/pull/29038 when
unifying the "owner" abstractions, causing `findNodeHandle` to warn even
outside of `render()` invocations.
Throw an error during module initialization if the version of the
"react-dom" package does not match the version of "react".
We used to be more relaxed about this, because the "react" package
changed so infrequently. However, we now have many more features that
rely on an internal protocol between the two packages, including Hooks,
Float, and the compiler runtime. So it's important that both packages
are versioned in lockstep.
Before this change, a version mismatch would often result in a cryptic
internal error with no indication of the root cause.
Instead, we will now compare the versions during module initialization
and immediately throw an error to catch mistakes as early as possible
and provide a clear error message.
We previously had two slightly different concepts for "current fiber".
There's the "owner" which is set inside of class components in prod if
string refs are enabled, and sometimes inside function components in DEV
but not other contexts.
Then we have the "current fiber" which is only set in DEV for various
warnings but is enabled in a bunch of contexts.
This unifies them into a single "current fiber".
The concept of string refs shouldn't really exist so this should really
be a DEV only concept. In the meantime, this sets the current fiber
inside class render only in prod, however, in DEV it's now enabled in
more contexts which can affect the string refs. That was already the
case that a string ref in a Function component was only connecting to
the owner in prod. Any string ref associated with any non-class won't
work regardless so that's not an issue. The practical change here is
that an element with a string ref created inside a life-cycle associated
with a class will work in DEV but not in prod. Since we need the current
fiber to be available in more contexts in DEV for the debugging
purposes. That wouldn't affect any old code since it would have a broken
ref anyway. New code shouldn't use string refs anyway.
The other implication is that "owner" doesn't necessarily mean
"rendering" since we need the "owner" to track other debug information
like stacks - in other contexts like useEffect, life cycles, etc.
Internally we have a separate `isRendering` flag that actually means
we're rendering but even that is a very overloaded concept. So anything
that uses "owner" to imply rendering might be wrong with this change.
This is a first step to a larger refactor for tracking current rendering
information.
---------
Co-authored-by: Sebastian Silbermann <silbermann.sebastian@gmail.com>
Updates Suspensey instances and resources to preload even during urgent
updates and to potentially suspend.
The current implementation is unchanged for transitions but for sync
updates if there is a suspense boundary above the resource/instance it
will be rendered in fallback mode instead.
Note: This behavior is not what we want for images once we make them
suspense enabled. We will need to have forked behavior here to
distinguish between stylesheets which should never commit when not
loaded and images which should commit after a small delay
## Summary
The experiment has shown no significant performance changes. This PR
removes it.
## How did you test this change?
```
yarn flow native
yarn lint
```
## Summary
This PR makes some fixes to the `fastAddProperties` function:
- Use `if (!attributeConfig)` instead of `if (attributeConfig ===
undefined)` to account for `null`.
- If a prop has an Object `attributeConfig` with a `diff` function
defined on it, treat it as an atomic value to keep the semantics of
`diffProperties`.
## How did you test this change?
Build and run RNTester app.
## Summary
This PR introduces Fabric-only version of
`ReactNativeAttributesPayload`. It is a copy-paste of
`ReactNativeAttributesPayload.js`, and is called
`ReactNativeAttributesPayloadFabric.js`.
The idea behind this change is that certain optimizations in prop
diffing may actually be a regression on the old architecture. For
example, removing custom diffing may result in larger updateProps
payloads. Which is, I guess, fine with JSI, but might be a problem with
the bridge.
## How did you test this change?
There should be no runtime effect of this change.
## Summary
This PR introduces a faster version of the `addProperties` function.
This new function is basically the `diffProperties` with `prevProps` set
to `null`, propagated constants, and all the unreachable code paths
collapsed.
## How did you test this change?
I've tested this change with [the benchmark
app](https://github.com/react-native-community/RNNewArchitectureApp/tree/new-architecture-benchmarks)
and got ~4.4% improvement in the view creation time.
## Summary
I'm looking at cleaning up some unnecessary manual property flattening
in React Native and wanted to verify this behaviour is working as
expected, where properties from nested objects will always overwrite
properties from the base object.
## How did you test this change?
Unit tests
Rebasing and landing https://github.com/facebook/react/pull/28798
This PR was approved already but held back to give time for the sync.
Rebased and landing here without pushing to seb's remote to avoid
possibility of lost updates
---------
Co-authored-by: Sebastian Markbage <sebastian@calyptus.eu>
## Summary
This PR adds early return to the `diff` function. We don't need to go
through all the entries of `nextProps`, process and deep-diff the values
if `nextProps` is the same object as `prevProps`. Roughly 6% of all
`diffProperties` calls can be skipped.
## How did you test this change?
RNTester.
## Overview
There's currently a bug in RN now that we no longer re-throw errors. The
`showErrorDialog` function in React Native only logs the errors as soft
errors, and never a fatal. RN was depending on the global handler for
the fatal error handling and logging.
Instead of fixing this in `ReactFiberErrorDialog`, we can implement the
new root options in RN to handle caught/uncaught/recoverable in the
respective functions, and delete ReactFiberErrorDialog. I'll follow up
with a RN PR to implement these options and fix the error handling.
This updates the behavior of form actions to automatically reset the
form's uncontrolled inputs after the action finishes.
This is a frequent feature request for people using actions and it
aligns the behavior of client-side form submissions more closely with
MPA form submissions.
It has no impact on controlled form inputs. It's the same as if you
called `form.reset()` manually, except React handles the timing of when
the reset happens, which is tricky/impossible to get exactly right in
userspace.
The reset shouldn't happen until the UI has updated with the result of
the action. So, resetting inside the action is too early.
Resetting in `useEffect` is better, but it's later than ideal because
any effects that run before it will observe the state of the form before
it's been reset.
It needs to happen in the mutation phase of the transition. More
specifically, after all the DOM mutations caused by the transition have
been applied. That way the `defaultValue` of the inputs are updated
before the values are reset. The idea is that the `defaultValue`
represents the current, canonical value sent by the server.
Note: this change has no effect on form submissions that aren't
triggered by an action.
This is similar to #28771 but for isomorphic. We need a make over for
these dispatchers anyway so this is the first step. Also helps flush out
some internals usage that will break anyway.
It flattens the inner mutable objects onto the ReactSharedInternals.
Currently updatePriority is tracked in the reconciler. `flushSync` is
going to be implemented reconciler agnostic soon and we need to move the
tracking of this state to the renderer and out of reconciler. This
change implements new renderer bin dings for getCurrentUpdatePriority
and setCurrentUpdatePriority.
I was originally going to have the getter also do the event priority
defaulting using window.event so we eliminate getCur rentEventPriority
but this makes all the callsites where we store the true current
updatePriority on the stack harder to work with so for now they remain
separate.
I also moved runWithPriority to the renderer since it really belongs
whereever the state is being managed and it is only currently exposed in
the DOM renderer.
Additionally the current update priority is not stored on
ReactDOMSharedInternals. While not particularly meaningful in this
change it opens the door to implementing `flushSync` outside of the
reconciler
This implements the concept of a DEV-only "owner" for Server Components.
The owner concept isn't really super useful. We barely use it anymore,
but we do have it as a concept in DevTools in a couple of cases so this
adds it for parity. However, this is mainly interesting because it could
be used to wire up future owner-based stacks.
I do this by outlining the DebugInfo for a Server Component
(ReactComponentInfo). Then I just rely on Flight deduping to refer to
that. I refer to the same thing by referential equality so that we can
associate a Server Component parent in DebugInfo with an owner.
If you suspend and replay a Server Component, we have to restore the
same owner. To do that, I did a little ugly hack and stashed it on the
thenable state object. Felt unnecessarily complicated to add a stateful
wrapper for this one dev-only case.
The owner could really be anything since it could be coming from a
different implementation. Because this is the first time we have an
owner other than Fiber, I have to fix up a bunch of places that assumes
Fiber. I mainly did the `typeof owner.tag === 'number'` to assume it's a
Fiber for now.
This also doesn't actually add it to DevTools / RN Inspector yet. I just
ignore them there for now.
Because Server Components can be async the owner isn't tracked after an
await. We need per-component AsyncLocalStorage for that. This can be
done in a follow up.
Saves some bytes and ensures that we're actually disabling it.
Turns out this flag wasn't disabling React Native/Fabric, React Noop and
React ART legacy modes so those are updated too.
Should be rebased on #28681.
