Fixes tests against React 18 after
https://github.com/facebook/react/pull/31154:
- Set `supportsTimeline` to true for `Store`.
- Execute `store.profilerStore.startProfiling` after `legacyRender`
import, because this is where `react-dom` is imported and renderer is
registered. We don't yet propagate `isProfiling` flag to newly
registered renderers, when profiling already started see:
d5bba18b5d/packages/react-devtools-shared/src/hook.js (L203-L204)
This flag will be used to gate a new timeline profiler that's integrate
with the Performance Tab and the new performance.measure extensions in
Chrome.
It replaces the existing DevTools feature so this disables
enableSchedulingProfiler when it is enabled since they can interplay in
weird ways potentially.
This means that experimental React now disable scheduling profiler and
enables this new approach.
When a component suspends and is replaced by a fallback, we should start
prerendering the fallback immediately, even before any new data is
received. During the retry, we can enter prerender mode directly if
we're sure that no new data was received since we last attempted to
render the boundary.
To do this, when completing the fallback, we leave behind a pending
retry lane on the Suspense boundary. Previously we only did this once a
promise resolved, but by assigning a lane during the complete phase, we
will know that there's speculative work to be done.
Then, upon committing the fallback, we mark the retry lane as suspended
— but only if nothing was pinged or updated in the meantime. That allows
us to immediately enter prerender mode (i.e. render without skipping any
siblings) when performing the retry.
## Summary
This is the pre-requisite for
https://github.com/facebook/react/pull/29231.
Current implementation of profiling hooks is only using
`performance.mark` and then makes `performance.clearMarks` call right
after it to free the memory. We've been relying on this assumption in
the tests that every mark is cleared by the time we check something.
https://github.com/facebook/react/pull/29231 adds `performance.measure`
calls and the `start` mark is not cleared until the corresponding `stop`
one is registered, and then they are cleared together.
## How did you test this change?
To test against React from source:
```
yarn test --build --project=devtools -r=experimental --ci
```
To test against React 18:
```
./scripts/circleci/download_devtools_regression_build.js 18.0 --replaceBuild
node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 18.0 --ci
```
## Overview
Updates `eslint-plugin-jest` and enables the recommended rules with some
turned off that are unhelpful.
The main motivations is:
a) we have a few duplicated tests, which this found an I deleted
b) making sure we don't accidentally commit skipped tests
This PR reorganizes the `react-dom` entrypoint to only pull in code that
is environment agnostic. Previously if you required anything from this
entrypoint in any environment the entire client reconciler was loaded.
In a prior release we added a server rendering stub which you could
alias in server environments to omit this unecessary code. After landing
this change this entrypoint should not load any environment specific
code.
While a few APIs are truly client (browser) only such as createRoot and
hydrateRoot many of the APIs you import from this package are only
useful in the browser but could concievably be imported in shared code
(components running in Fizz or shared components as part of an RSC app).
To avoid making these require opting into the client bundle we are
keeping them in the `react-dom` entrypoint and changing their
implementation so that in environments where they are not particularly
useful they do something benign and expected.
#### Removed APIs
The following APIs are being removed in the next major. Largely they
have all been deprecated already and are part of legacy rendering modes
where concurrent features of React are not available
* `render`
* `hydrate`
* `findDOMNode`
* `unmountComponentAtNode`
* `unstable_createEventHandle`
* `unstable_renderSubtreeIntoContainer`
* `unstable_runWithPrioirty`
#### moved Client APIs
These APIs were available on both `react-dom` (with a warning) and
`react-dom/client`. After this change they are only available on
`react-dom/client`
* `createRoot`
* `hydrateRoot`
#### retained APIs
These APIs still exist on the `react-dom` entrypoint but have normalized
behavior depending on which renderers are currently in scope
* `flushSync`: will execute the function (if provided) inside the
flushSync implemention of FlightServer, Fizz, and Fiber DOM renderers.
* `unstable_batchedUpdates`: This is a noop in concurrent mode because
it is now the only supported behavior because there is no legacy
rendering mode
* `createPortal`: This just produces an object. It can be called from
anywhere but since you will probably not have a handle on a DOM node to
pass to it it will likely warn in environments other than the browser
* preloading APIS such as `preload`: These methods will execute the
preload across all renderers currently in scope. Since we resolve the
Request object on the server using AsyncLocalStorage or the current
function stack in practice only one renderer should act upon the
preload.
In addition to these changes the server rendering stub now just rexports
everything from `react-dom`. In a future minor we will add a warning
when using the stub and in the next major we will remove the stub
altogether
We broke the ability to "break on uncaught exceptions" by adding a
try/catch higher up in the scheduling. We're giving up on fixing that so
we can remove the replay trick inside an event handler.
The issue with that approach is that we end up double logging a lot of
errors in DEV since they get reported to the page.
It's also a lot of complexity around this feature.
### Based on https://github.com/facebook/react/pull/27505
If a parent render spawns a deferred task with useDeferredValue, but the
parent render suspends, we should not wait for the parent render to
complete before attempting to render the final value.
The reason is that the initialValue argument to useDeferredValue is
meant to represent an immediate preview of the final UI. If we can't
render it "immediately", we might as well skip it and go straight to the
"real" value.
This is an improvement over how a userspace implementation of
useDeferredValue would work, because a userspace implementation would
have to wait for the parent task to commit (useEffect) before spawning
the deferred task, creating a waterfall.
This adds an experimental hook tentatively called useOptimisticState.
(The actual name needs some bikeshedding.)
The headline feature is that you can use it to implement optimistic
updates. If you set some optimistic state during a transition/action,
the state will be automatically reverted once the transition completes.
Another feature is that the optimistic updates will be continually
rebased on top of the latest state.
It's easiest to explain with examples; we'll publish documentation as
the API gets closer to stabilizing. See tests for now.
Technically the use cases for this hook are broader than just optimistic
updates; you could use it implement any sort of "pending" state, such as
the ones exposed by useTransition and useFormStatus. But we expect
people will most often reach for this hook to implement the optimistic
update pattern; simpler cases are covered by those other hooks.
(This only affects our own internal repo; it's not a public API.)
I think most of us agree this is a less confusing name. It's possible
someone will confuse it with `console.log`. If that becomes a problem we
can warn in dev or something.
This converts some of our test suite to use the `waitFor` test pattern,
instead of the `expect(Scheduler).toFlushAndYield` pattern. Most of
these changes are automated with jscodeshift, with some slight manual
cleanup in certain cases.
See #26285 for full context.
The old version of prettier we were using didn't support the Flow syntax
to access properties in a type using `SomeType['prop']`. This updates
`prettier` and `rollup-plugin-prettier` to the latest versions.
I added the prettier config `arrowParens: "avoid"` to reduce the diff
size as the default has changed in Prettier 2.0. The largest amount of
changes comes from function expressions now having a space. This doesn't
have an option to preserve the old behavior, so we have to update this.
Depends on #25876
Resubmit #25711 again(previously reverted in #25812), and added the fix
for unwinding in selective hydration during a hydration on the sync
lane.
We're reverting the stack of changes that this code belongs to in order
to unblock the sync to Meta's internal codebase. We will attempt to
re-land once the sync is unblocked.
I have not yet verified that this fixes the error that were reported
internally. I will do that before landing.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn debug-test --watch TestName`, open
`chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Submit https://github.com/facebook/react/pull/25698 again after fixing
the devtools regression tests in CI.
The PR changed lanes representation and some snapshot tests of devtools
captures lanes. In devtools tests for older versions, the updated lanes
representation no longer matched. The fix is to disable regression tests
for those tests.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
```
./scripts/circleci/download_devtools_regression_build.js 18.0 --replaceBuild
node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 18.0
```
Unrelated to this PR. There was some issue with jest caching when I
locally ran that command. it didn't seem to include the @reactVersion
transform, but if I manually modified `scripts/jest/preprocessor.js` or
ran ` yarn test --clearCache`, the jest test runs correctly.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn debug-test --watch TestName`, open
`chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
For more context: https://github.com/facebook/react/pull/25692
Based on https://github.com/facebook/react/pull/25695. This PR adds the
`SyncHydrationLane` so we rewind on sync updates during selective
hydration. Also added tests for ContinuouseHydration and
DefaultHydration lanes.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
yarn test
* Facebook -> Meta in copyright
rg --files | xargs sed -i 's#Copyright (c) Facebook, Inc. and its affiliates.#Copyright (c) Meta Platforms, Inc. and affiliates.#g'
* Manual tweaks
This PR cleans up the DevTools codebase by:
* Consolidating `normalizeCodeLocInfo` into one place
* Remove unused source argument in the DevTools component stacks code
This PR adds a component stack field to the `schedule-state-update` event. The algorithm is as follows:
* During profiling, whenever a state update happens collect the parents of the fiber that caused the state update and store it in a map
* After profiling finishes, post process the `schedule-state-update` event and using the parent fibers, generate the component stack by using`describeFiber`, a function that uses error throwing to get the location of the component by calling the component without props.
---
Co-authored-by: Blake Friedman <blake.friedman@gmail.com>
This PR adds the reactVersion pragma to tests.
Tests without the reactVersion pragma won't be run if the reactVersion pragma isn't specified.
Tested each React version manually with the pragma to make sure the tests pass
* Move createRoot/hydrateRoot to /client
We want these APIs ideally to be imported separately from things you
might use in arbitrary components (like flushSync). Those other methods
are "isomorphic" to how the ReactDOM tree is rendered. Similar to hooks.
E.g. importing flushSync into a component that only uses it on the client
should ideally not also pull in the entry client implementation on the
server.
This also creates a nicer parity with /server where the roots are in a
separate entry point.
Unfortunately, I can't quite do this yet because we have some legacy APIs
that we plan on removing (like findDOMNode) and we also haven't implemented
flushSync using a flag like startTransition does yet.
Another problem is that we currently encourage these APIs to be aliased by
/profiling (or unstable_testing). In the future you don't have to alias
them because you can just change your roots to just import those APIs and
they'll still work with the isomorphic forms. Although we might also just
use export conditions for them.
For that all to work, I went with a different strategy for now where the
real API is in / but it comes with a warning if you use it. If you instead
import /client it disables the warning in a wrapper. That means that if you
alias / then import /client that will inturn import the alias and it'll
just work.
In a future breaking changes (likely when we switch to ESM) we can just
remove createRoot/hydrateRoot from / and move away from the aliasing
strategy.
* Update tests to import from react-dom/client
* Fix fixtures
* Update warnings
* Add test for the warning
* Update devtools
* Change order of react-dom, react-dom/client alias
I think the order matters here. The first one takes precedence.
* Require react-dom through client so it can be aliased
Co-authored-by: Andrew Clark <git@andrewclark.io>
Refactor DevTools to record Timeline data (in memory) while profiling. Updated the Profiler UI to import/export Timeline data along with legacy profiler data.
Relates to issue #22529
Until now, DEV and PROFILING builds of React recorded Timeline profiling data using the User Timing API. This commit changes things so that React records this data by calling methods on the DevTools hook. (For now, DevTools still records that data using the User Timing API, to match previous behavior.)
This commit is large but most of it is just moving things around:
* New methods have been added to the DevTools hook (in "backend/profilingHooks") for recording the Timeline performance events.
* Reconciler's "ReactFiberDevToolsHook" has been updated to call these new methods (when they're present).
* User Timing method calls in "SchedulingProfiler" have been moved to DevTools "backend/profilingHooks" (to match previous behavior, for now).
* The old reconciler tests, "SchedulingProfiler-test" and "SchedulingProfilerLabels-test", have been moved into DevTools "TimelineProfiler-test" to ensure behavior didn't change unexpectedly.
* Two new methods have been added to the injected renderer interface: injectProfilingHooks() and getLaneLabelMap().
Relates to #22529.
