This update was a bit more involved.
- `React$Component` was removed, I replaced it with Flow component
types.
- Flow removed shipping the standard library. This adds the environment
libraries back from `flow-typed` which seemed to have changed slightly
(probably got more precise and less `any`s). Suppresses some new type
errors.
## Summary
We're adding support for `Document` instances in React Native (as
`ReactNativeDocument` instances) in
https://github.com/facebook/react-native/pull/49012 , which requires the
React Fabric renderer to handle its lifecycle.
This modifies the renderer to create those document instances and
associate them with the React root, and provides a new method for React
Native to access them given its containerTag / rootTag.
## How did you test this change?
Tested e2e in https://github.com/facebook/react-native/pull/49012
manually syncing these changes.
## Summary
Callers for this method has been removed in
65bda54232,
so these methods no longer need to be conditionally exported and the
feature flag can be removed.
## How did you test this change?
Flow fabric/native
## Summary
The React Native Renderer exports a
`__SECRET_INTERNALS_DO_NOT_USE_OR_YOU_WILL_BE_FIRED` property with a
single method that has no remaining call sites:
`computeComponentStackForErrorReporting`
This PR cleans up this unused export.
## How did you test this change?
```
$ yarn
$ yarn flow fabric
$ yarn test
```
## Summary
Flow will eventually remove the specific `React.Element` type. For most
of the code, it can be replaced with `React.MixedElement` or
`React.Node`.
When specific react elements are required, it needs to be replaced with
either `React$Element` which will trigger a `internal-type` lint error
that can be disabled project-wide, or use
`ExactReactElement_DEPRECATED`.
Fortunately in this case, this one can be replaced with just
`React.MixedElement`.
## How did you test this change?
`flow`
We use static dependency injection. We shouldn't use this dynamic
dependency injection we do for DevTools internals. There's also meta
programming like spreading and stuff that isn't needed.
This moves the config from `injectIntoDevTools` to the FiberConfig so it
can be statically resolved.
Closure Compiler has some trouble generating optimal code for this
anyway so ideally we'd refactor this further but at least this is better
and saves a few bytes and avoids some code paths (when minified).
Throw an error during module initialization if the version of the
"react-dom" package does not match the version of "react".
We used to be more relaxed about this, because the "react" package
changed so infrequently. However, we now have many more features that
rely on an internal protocol between the two packages, including Hooks,
Float, and the compiler runtime. So it's important that both packages
are versioned in lockstep.
Before this change, a version mismatch would often result in a cryptic
internal error with no indication of the root cause.
Instead, we will now compare the versions during module initialization
and immediately throw an error to catch mistakes as early as possible
and provide a clear error message.
## Overview
There's currently a bug in RN now that we no longer re-throw errors. The
`showErrorDialog` function in React Native only logs the errors as soft
errors, and never a fatal. RN was depending on the global handler for
the fatal error handling and logging.
Instead of fixing this in `ReactFiberErrorDialog`, we can implement the
new root options in RN to handle caught/uncaught/recoverable in the
respective functions, and delete ReactFiberErrorDialog. I'll follow up
with a RN PR to implement these options and fix the error handling.
Saves some bytes and ensures that we're actually disabling it.
Turns out this flag wasn't disabling React Native/Fabric, React Noop and
React ART legacy modes so those are updated too.
Should be rebased on #28681.
Stacked on #28627.
This makes error logging configurable using these
`createRoot`/`hydrateRoot` options:
```
onUncaughtError(error: mixed, errorInfo: {componentStack?: ?string}) => void
onCaughtError(error: mixed, errorInfo: {componentStack?: ?string, errorBoundary?: ?React.Component<any, any>}) => void
onRecoverableError(error: mixed, errorInfo: {digest?: ?string, componentStack?: ?string}) => void
```
We already have the `onRecoverableError` option since before.
Overriding these can be used to implement custom error dialogs (with
access to the `componentStack`).
It can also be used to silence caught errors when testing an error
boundary or if you prefer not getting logs for caught errors that you've
already handled in an error boundary.
I currently expose the error boundary instance but I think we should
probably remove that since it doesn't make sense for non-class error
boundaries and isn't very useful anyway. It's also unclear what it
should do when an error is rethrown from one boundary to another.
Since these are public APIs now we can implement the
ReactFiberErrorDialog forks using these options at the roots of the
builds. So I unforked those files and instead passed a custom option for
the native and www builds.
To do this I had to fork the ReactDOMLegacy file into ReactDOMRootFB
which is a duplication but that will go away as soon as the FB fork is
the only legacy root.
Adds `isChildPublicInstance` method to both renderers (Fabric and
Paper), which will receive 2 public instances and return if first
argument is an ancestor of the second, based on fibers.
This will be used as a fallback when DOM node APIs are not available:
for Paper renderer or for Fabric without DOM node APIs.
How it is going to be used: to determine which `AppContainer` component
in RN is responsible for highlighting an inspected element on the
screen.
## Summary
This is required for the case when we have an instance and want to get
inspector data for it. Such case occurs when RN's application being
debugged via React DevTools.
React DevTools sends instance to RN, which then gets all auxiliary data
to highlight some elements. Having `getInspectorDataForInstance` method
exposed makes it possible to easily get current props from fiber, which
then can be used to display some margins & paddings for hovered element
(via props.style).
I see that `getInspectorDataForInstance` is being exported at the top
level of the renderer, but feels like this should also be inside
DevTools global hook, the same way we use it for
[`getInspectorDataForViewAtPoint`](e7d3662904/packages/react-native/Libraries/Inspector/getInspectorDataForViewAtPoint.js).
Added an explicit type to all $FlowFixMe suppressions to reduce
over-suppressions of new errors that might be caused on the same lines.
Also removes suppressions that aren't used (e.g. in a `@noflow` file as
they're purely misleading)
Test Plan:
yarn flow-ci
## Summary
The following methods have exactly the same implementation on Fabric and
the legacy renderer:
* `findHostInstance_DEPRECATED`
* `findNodeHandle`
* `dispatchCommand`
* `sendAccessibilityEvent`
This just extracts those functions to a common module so they're easier
to change (no need to sync changes in 2 files).
## How did you test this change?
Existing tests (this is a refactor).
## Summary
A few methods in `ReactFiberReconciler` are supposed to return
`PublicInstance` values, but they return the `stateNode` from the fiber
directly. This assumes that the `stateNode` always matches the public
instance (which it does on Web) but that's not the case in React Native,
where the public instance is a field in that object.
This hasn't caused issues because everywhere where we use that method in
React Native we actually extract the real public instance from this
"fake" public instance.
This PR fixes the inconsistency and cleans up some code.
## How did you test this change?
Existing tests.
Revert https://github.com/facebook/react/commit/353c30252. The commit
breaks old React Native where `nativeFabricUIManager` is undefined. I
need to add unit test for this to make sure it doesn't happen in the
future and create a mechanism to deal with undefined
`nativeFabricUIManager`.
This is to unblock React sync to React Native.
This setting is an incremental path to the next Flow version enforcing
type annotations on most functions (except some inline callbacks).
Used
```
node_modules/.bin/flow codemod annotate-functions-and-classes --write .
```
to add a majority of the types with some hand cleanup when for large
inferred objects that should just be `Fiber` or weird constructs
including `any`.
Suppressed the remaining issues.
Builds on #25918
Calling any function on `nativeFabricUIManager`, for example
`nativeFabricUIManager.measure`, results in a round trip to the host
platform through jsi layer. It is the same for repeated calls to same
host function. This is unnecessary overload which can be avoided by
retaining host function in a variable.
We've heard from multiple contributors that the Reconciler forking
mechanism was confusing and/or annoying to deal with. Since it's
currently unused and there's no immediate plans to start using it again,
this removes the forking.
Fully removing the fork is split into 2 steps to preserve file history:
**#25774 previous PR that did the bulk of the work:**
- remove `enableNewReconciler` feature flag.
- remove `unstable_isNewReconciler` export
- remove eslint rules for cross fork imports
- remove `*.new.js` files and update imports
- merge non-suffixed files into `*.old` files where both exist
(sometimes types were defined there)
**This PR**
- rename `*.old` files
We've heard from multiple contributors that the Reconciler forking
mechanism was confusing and/or annoying to deal with. Since it's
currently unused and there's no immediate plans to start using it again,
this removes the forking.
Fully removing the fork is split into 2 steps to preserve file history:
**This PR**
- remove `enableNewReconciler` feature flag.
- remove `unstable_isNewReconciler` export
- remove eslint rules for cross fork imports
- remove `*.new.js` files and update imports
- merge non-suffixed files into `*.old` files where both exist
(sometimes types were defined there)
**#25775**
- rename `*.old` files
* Facebook -> Meta in copyright
rg --files | xargs sed -i 's#Copyright (c) Facebook, Inc. and its affiliates.#Copyright (c) Meta Platforms, Inc. and affiliates.#g'
* Manual tweaks
* Pass children to hydration root constructor
I already made this change for the concurrent root API in #23309. This
does the same thing for the legacy API.
Doesn't change any behavior, but I will use this in the next steps.
* Add isRootDehydrated function
Currently this does nothing except read a boolean field, but I'm about
to change this logic.
Since this is accessed by React DOM, too, I put the function in a
separate module that can be deep imported. Previously, it was accessing
the FiberRoot directly. The reason it's a separate module is to break a
circular dependency between React DOM and the reconciler.
* Allow updates at lower pri without forcing client render
Currently, if a root is updated before the shell has finished hydrating
(for example, due to a top-level navigation), we immediately revert to
client rendering. This is rare because the root is expected is finish
quickly, but not exceedingly rare because the root may be suspended.
This adds support for updating the root without forcing a client render
as long as the update has lower priority than the initial hydration,
i.e. if the update is wrapped in startTransition.
To implement this, I had to do some refactoring. The main idea here is
to make it closer to how we implement hydration in Suspense boundaries:
- I moved isDehydrated from the shared FiberRoot object to the
HostRoot's state object.
- In the begin phase, I check if the root has received an by comparing
the new children to the initial children. If they are different, we
revert to client rendering, and set isDehydrated to false using a
derived state update (a la getDerivedStateFromProps).
- There are a few places where we used to set root.isDehydrated to false
as a way to force a client render. Instead, I set the ForceClientRender
flag on the root work-in-progress fiber.
- Whenever we fall back to client rendering, I log a recoverable error.
The overall code structure is almost identical to the corresponding
logic for Suspense components.
The reason this works is because if the update has lower priority than
the initial hydration, it won't be processed during the hydration
render, so the children will be the same.
We can go even further and allow updates at _higher_ priority (though
not sync) by implementing selective hydration at the root, like we do
for Suspense boundaries: interrupt the current render, attempt hydration
at slightly higher priority than the update, then continue rendering the
update. I haven't implemented this yet, but I've structured the code in
anticipation of adding this later.
* Wrap useMutableSource logic in feature flag
I already made this change for the concurrent root API in #23309. This
does the same thing for the legacy API.
Doesn't change any behavior, but I will use this in the next steps.
- Add the type of transition tracing callbacks
- Add transition tracing callbacks as an option to `createRoot`
- Add transition tracing callbacks on the root
- Add option to pass transition tracing callbacks to createReactNoop
Minor follow up to initial onRecoverableError PR.
When onRecoverableError is not provided to `createRoot`, the
renderer falls back to a default implementation. Originally I
implemented this with a host config method, but what we can do instead
is pass the default implementation the root constructor as if it were
a user provided one.
* [RFC] Add onHydrationError option to hydrateRoot
This is not the final API but I'm pushing it for discussion purposes.
When an error is thrown during hydration, we fallback to client
rendering, without triggering an error boundary. This is good because,
in many cases, the UI will recover and the user won't even notice that
something has gone wrong behind the scenes.
However, we shouldn't recover from these errors silently, because the
underlying cause might be pretty serious. Server-client mismatches are
not supposed to happen, even if UI doesn't break from the users
perspective. Ignoring them could lead to worse problems later. De-opting
from server to client rendering could also be a significant performance
regression, depending on the scope of the UI it affects.
So we need a way to log when hydration errors occur.
This adds a new option for `hydrateRoot` called `onHydrationError`. It's
symmetrical to the server renderer's `onError` option, and serves the
same purpose.
When no option is provided, the default behavior is to schedule a
browser task and rethrow the error. This will trigger the normal browser
behavior for errors, including dispatching an error event. If the app
already has error monitoring, this likely will just work as expected
without additional configuration.
However, we can also expose additional metadata about these errors, like
which Suspense boundaries were affected by the de-opt to client
rendering. (I have not exposed any metadata in this commit; API needs
more design work.)
There are other situations besides hydration where we recover from an
error without surfacing it to the user, or notifying an error boundary.
For example, if an error occurs during a concurrent render, it could be
due to a data race, so we try again synchronously in case that fixes it.
We should probably expose a way to log these types of errors, too. (Also
not implemented in this commit.)
* Log all recoverable errors
This expands the scope of onHydrationError to include all errors that
are not surfaced to the UI (an error boundary). In addition to errors
that occur during hydration, this also includes errors that recoverable
by de-opting to synchronous rendering. Typically (or really, by
definition) these errors are the result of a concurrent data race;
blocking the main thread fixes them by prevents subsequent races.
The logic for de-opting to synchronous rendering already existed. The
only thing that has changed is that we now log the errors instead of
silently proceeding.
The logging API has been renamed from onHydrationError
to onRecoverableError.
* Don't log recoverable errors until commit phase
If the render is interrupted and restarts, we don't want to log the
errors multiple times.
This change only affects errors that are recovered by de-opting to
synchronous rendering; we'll have to do something else for errors
during hydration, since they use a different recovery path.
* Only log hydration error if client render succeeds
Similar to previous step.
When an error occurs during hydration, we only want to log it if falling
back to client rendering _succeeds_. If client rendering fails,
the error will get reported to the nearest error boundary, so there's
no need for a duplicate log.
To implement this, I added a list of errors to the hydration context.
If the Suspense boundary successfully completes, they are added to
the main recoverable errors queue (the one I added in the
previous step.)
* Log error with queueMicrotask instead of Scheduler
If onRecoverableError is not provided, we default to rethrowing the
error in a separate task. Originally, I scheduled the task with
idle priority, but @sebmarkbage made the good point that if there are
multiple errors logs, we want to preserve the original order. So I've
switched it to a microtask. The priority can be lowered in userspace
by scheduling an additional task inside onRecoverableError.
* Only use host config method for default behavior
Redefines the contract of the host config's logRecoverableError method
to be a default implementation for onRecoverableError if a user-provided
one is not provided when the root is created.
* Log with reportError instead of rethrowing
In modern browsers, reportError will dispatch an error event, emulating
an uncaught JavaScript error. We can do this instead of rethrowing
recoverable errors in a microtask, which is nice because it avoids any
subtle ordering issues.
In older browsers and test environments, we'll fall back
to console.error.
* Naming nits
queueRecoverableHydrationErrors -> upgradeHydrationErrorsToRecoverable
When an `identifierPrefix` option is given, React will add it to the
beginning of ids generated by `useId`.
The main use case is to avoid conflicts when there are multiple React
roots on a single page.
The server API already supported an `identifierPrefix` option. It's not
only used by `useId`, but also for React-generated ids that are used to
stitch together chunks of HTML, among other things. I added a
corresponding option to the client.
You must pass the same prefix option to both the server and client.
Eventually we may make this automatic by sending the prefix from the
server as part of the HTML stream.
This PR exports a new top-level API, getInspectorDataForInstance, for React Native (both development and production). Although this change adds a new export to the DEV bundle, it only impacts the production bundle for internal builds (not what's published to NPM).
We don't need this anymore because we flush in a microtask.
This should allow us to remove the logic in the event system that
tracks nested event dispatches.
I added a test to confirm that nested event dispatches don't triggger
a synchronous flush, like they would if we wrapped them `flushSync`. It
already passed; I added it to prevent a regression.
* The exported '<React.StrictMode>' tag remains the same and opts legacy subtrees into strict mode level one ('mode == StrictModeL1'). This mode enables DEV-only double rendering, double component lifecycles, string ref warnings, legacy context warnings, etc. The primary purpose of this mode is to help detected render phase side effects. No new behavior. Roots created with experimental 'createRoot' and 'createBlockingRoot' APIs will also (for now) continue to default to strict mode level 1.
In a subsequent commit I will add support for a 'level' attribute on the '<React.StrictMode>' tag (as well as a new option supported by ). This will be the way to opt into strict mode level 2 ('mode == StrictModeL2'). This mode will enable DEV-only double invoking of effects on initial mount. This will simulate future Offscreen API semantics for trees being mounted, then hidden, and then shown again. The primary purpose of this mode is to enable applications to prepare for compatibility with the new Offscreen API (more information to follow shortly).
For now, this commit changes no public facing behavior. The only mechanism for opting into strict mode level 2 is the pre-existing 'enableDoubleInvokingEffects' feature flag (only enabled within Facebook for now).
* Renamed strict mode constants
StrictModeL1 -> StrictLegacyMode and StrictModeL2 -> StrictEffectsMode
* Renamed tests
* Split strict effects mode into two flags
One flag ('enableStrictEffects') enables strict mode level 2. It is similar to 'debugRenderPhaseSideEffectsForStrictMode' which enables srtict mode level 1.
The second flag ('createRootStrictEffectsByDefault') controls the default strict mode level for 'createRoot' trees. For now, all 'createRoot' trees remain level 1 by default. We will experiment with level 2 within Facebook.
This is a prerequisite for adding a configurable option to 'createRoot' that enables choosing a different StrictMode level than the default.
* Add StrictMode 'unstable_level' prop and createRoot 'unstable_strictModeLevel' option
New StrictMode 'unstable_level' prop allows specifying which level of strict mode to use. If no level attribute is specified, StrictLegacyMode will be used to maintain backwards compatibility. Otherwise the following is true:
* Level 0 does nothing
* Level 1 selects StrictLegacyMode
* Level 2 selects StrictEffectsMode (which includes StrictLegacyMode)
Levels can be increased with nesting (0 -> 1 -> 2) but not decreased.
This commit also adds a new 'unstable_strictModeLevel' option to the createRoot and createBatchedRoot APIs. This option can be used to override default behavior to increase or decrease the StrictMode level of the root.
A subsequent commit will add additional DEV warnings:
* If a nested StrictMode tag attempts to explicitly decrease the level
* If a level attribute changes in an update
* RN: Implement `sendAccessibilityEvent` on HostComponent
Implement `sendAccessibilityEvent` on HostComponent for Fabric and non-Fabric RN.
Currently the Fabric version is a noop and non-Fabric uses
AccessibilityInfo directly. The Fabric version will be updated once
native Fabric Android/iOS support this method in the native UIManager.
* Move methods out of HostComponent
* Properly type dispatchCommand and sendAccessibilityEvent handle arg
* Implement Fabric side of sendAccessibilityEvent
* Add tests: 1. Fabric->Fabric, 2. Paper->Fabric, 3. Fabric->Paper, 4. Paper->Paper
* Fix typo: ReactFaricEventTouch -> ReactFabricEventTouch
* fix flow types
* prettier
* Add feature flag
* Split stack from current fiber
You can get stack from any fiber, not just current.
* Refactor description of component frames
These should use fiber tags for switching. This also puts the relevant code
behind DEV flags.
* We no longer expose StrictMode in component stacks
They're not super useful and will go away later anyway.
* Update tests
Context is no longer part of SSR stacks. This was already the case on the
client.
forwardRef no longer is wrapped on the stack. It's still in getComponentName
but it's probably just noise in stacks. Eventually we'll remove the wrapper
so it'll go away anyway. If we use native stack frames they won't have this
extra wrapper.
It also doesn't pick up displayName from the outer wrapper. We could maybe
transfer it but this will also be fixed by removing the wrapper.
* Forward displayName onto the inner function for forwardRef and memo in DEV
This allows them to show up in stack traces.
I'm not doing this for lazy because lazy is supposed to be called on the
consuming side so you shouldn't assign it a name on that end. Especially
not one that mutates the inner.
* Use multiple instances of the fake component
We mutate the inner component for its name so we need multiple copies.
* Enable prefer-const rule
Stylistically I don't like this but Closure Compiler takes advantage of
this information.
* Auto-fix lints
* Manually fix the remaining callsites
